TSB82AA2IPGE Datasheet, PDF (1/3 Pages) Texas Instruments – 1394b OHCI-Lynx Controller

TSB82AA2
www.ti.com
1394b OHCI-Lynx Controller
SLLA221 – JUNE 2006
FEATURES
• Single 3.3-V supply (1.8-V internal core
voltage with regulator)
• 3.3-V and 5-V PCI signaling environments
• Serial bus data rates of 100M bits/s, 200M
bits/s, 400M bits/s, and 800M bits/s
• Physical write posting of up to three
outstanding transactions
• Serial ROM or boot ROM interface supports
2-wire serial EEPROM devices
• 33-MHz/64-bit and 33-MHz/32-bit selectable
PCI interface
• Multifunction terminal (MFUNC terminal 1):
– PCI_CLKRUN protocol per the PCI Mobile
Design Guide
– General-purpose I/O
– CYCLEIN/CYCLEOUT for external cycle
timer control for customized
synchronization
• PCI burst transfers and deep FIFOs to
tolerate large host latency:
– Transmit FIFO—5K asynchronous
– Transmit FIFO—2K isochronous
– Receive FIFO—2K asynchronous
– Receive FIFO—2K isochronous
• D0, D1, D2, and D3 power states and PME
events per the PCI Bus Power Management
Interface Specification
• Programmable asynchronous transmit
threshold
• Isochronous receive dual-buffer mode
• Out-of-order pipelining for asynchronous
transmit requests
• Register access fail interrupt when the PHY
SYSCLK is not active
• Initial bandwidth available and initial
channels available registers
• Digital video and audio performance
enhancements
• Fabricated in advanced low-power CMOS
process
• Packaged in 144-terminal LQFP (PGE) or
176-ball MicroStar BGA (GGW)
DESCRIPTION
The TSB82AA2 OHCI-Lynx is a discrete 1394b link-layer device, which has been designed to meet the
demanding requirements of today’s 1394 bus designs. The TSB82AA2 device is capable of exceptional 800M
bits/s performance; thus, providing the throughput and bandwidth to move data efficiently and quickly between
the PCI and 1394 buses. The TSB82AA2 device also provides outstanding ultra-low power operation and
intelligent power management capabilities. The device provides the IEEE 1394 link function and is compatible
with 100M bits/s, 200M bits/s, 400M bits/s, and 800M bits/s serial bus data rates.
The TSB82AA2 improved throughput and increased bandwidth make it ideal for today’s high-end PCs and open
the door for the development of S800 RAID- and SAN-based peripherals.
The TSB82AA2 OHCI-Lynx operates as the interface between a 33-MHz/64-bit or 33-MHz/32-bit PCI local bus
and a compatible 1394b PHY-layer device (such as the TSB81BA3 device) that is capable of supporting serial
data rates at 98.304M, 196.608M, 393.216M, or 786.432M bits/s (referred to as S100, S200, S400, or S800
speeds, respectively). When acting as a PCI bus master, the TSB82AA2 device is capable of multiple cacheline
bursts of data, which can transfer at 264M bytes/s for 64-bit transfers or 132M bytes/s for 32-bit transfers after
connecting to the memory controller.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated