|
TS3USB221_17 Datasheet, PDF (1/27 Pages) Texas Instruments – High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer – Demultiplexer Switch With Single Enable | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TS3USB221
SCDS220I â NOVEMBER 2006 â REVISED JANUARY 2016
TS3USB221 High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer â Demultiplexer
Switch With Single Enable
1 Features
â¢1 VCC Operation from 2.3 V and 3.6 V
⢠VI/O Accepts Signals up to 5.5 V
⢠1.8-V Compatible Control-Pin Inputs
⢠Low-Power Mode When OE Is Disabled (1 μA)
⢠rON = 6 ⦠Maximum
⢠ÎrON = 0.2 ⦠Typical
⢠Cio(on) = 6 pF Maximum
⢠Low Power Consumption (30 μA Maximum)
⢠ESD > 2000-V Human-Body Model (HBM)
⢠High Bandwidth (1.1 GHz Typical)
2 Applications
⢠Routes Signals for USB 1.0, 1.1, and 2.0
⢠Mobile Industry Processor Interface (MIPIâ¢)
Signal Routing
⢠MHL 1.0
Block Diagram
D+
1D+
Dâ
1Dâ
2D+
2Dâ
3 Description
The TS3USB221 is a high-bandwidth switch specially
designed for the switching of high-speed USB 2.0
signals in handset and consumer applications, such
as cell phones, digital cameras, and notebooks with
hubs or controllers with limited USB I/Os. The wide
bandwidth (1.1 GHz) of this switch allows signals to
pass with minimum edge and phase distortion. The
device multiplexes differential outputs from a USB
host device to one of two corresponding outputs. The
switch is bidirectional and offers little or no
attenuation of the high-speed signals at the outputs.
The TS3USB221 is designed for low bit-to-bit skew
and high channel to channel noise isolation. The
TS3USB221 is also compatible with various
standards, such as high-speed USB 2.0 (480 Mbps).
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TS3USB221
VSON (10)
UQFN (10)
3.00 mm à 3.00 mm
1.50 mm à 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic, Each FET Switch (SW)
A
B
VCC
S
Digital Control
OE
Charge
Pump
EN (see Note A)
A. EN is the internal enable signal applied to
the switch.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |