TS3A26746E_1111 Datasheet, PDF (1/8 Pages) Texas Instruments – 2 X 2 Crosspoint Switch for Audio Applications

www.ti.com
TS3A26746E
SCDS313B – FEBRUARY 2011 – REVISED NOVEMBER 2011
2 X 2 Crosspoint Switch for Audio Applications
Check for Samples: TS3A26746E
FEATURES
1
• Ultra Low R_ON for GND Switch (80-mΩ typical)
• R_ON for MIC Switch <10-Ω
• 3.0V to 3.6V V+ Operation
• Control Input is 1.8-V Logic Compatible
PINOUT
12
A
• 6-bump, 0.5mm pitch CSP Package (1.45mm ×
B
0.95mm × 0.5mm)
• Latch-Up Performance Exceeds 100 mA Per
C
JESD 78, Class II
• ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model (A114-B, Class
II)
– 500-V Charged-Device Model (C101)
• ESD Performance (SLEEVE, RING2)
– ±8-kV Contact Discharge (IEC 61000-4-2)
APPLICATIONS
• Cellular phones
• PDAs
• Portable Instrumentation
DESCRIPTION
The TS3A26746E is a 2 × 2 cross-point switch that is
used to interchange the Ground and MIC connections
on a headphone connector. The Ground switch has
an ultra low R_ON of <0.1Ω to minimize voltage drop
across it, preventing undesired increases in
headphone ground reference voltage. The switch
state is controlled via the SEL input. When
SEL=High, GND is connected to RING2 and MIC is
connected to SLEEVE. When SEL=Low, GND is
connected to SLEEVE and MIC is connected to
RING2. An internal 100k pull-up resistor on the SEL
input sets the default state of the switch.
• Digital Still Cameras
• Portable Navigation Devices
ORDERING INFORMATION
T_A
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER
TOP-SIDE MARKING
–40°C to 85°C
YZP - WCSP Tape and Reel
TS3A26746EYZPR
7N
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated