TPS92550_14 Datasheet, PDF (1/23 Pages) Texas Instruments – 450mA 14W Constant Current Buck LED Driver Micro-Module

TPS92550, TPS92550EVM
www.ti.com
SNVS806B – MAY 2012 – REVISED OCTOBER 2012
TPS92550 450mA 14W Constant Current Buck LED Driver Micro-Module
Check for Samples: TPS92550, TPS92550EVM
FEATURES
1
•2 Integrated all Power Components Including
the Power Inductor
• Wide Input Voltage Range : 4.5V–36V
• Constant Switching Frequency at 400kHz
• High Contrast Ratio (Minimum dimming
current pulse width < 16µs)
• Drives up to 10 LEDs in Series at 36V Input
• ±3.6% Typical LED Current Accuracy
• LED Current Adjustable from 300mA to 450mA
• Up to 96% Efficiency
• TPS92550 Modules can be Connected in
Parallel for Higher Current Operation
• Input Under-Voltage Lock-Out (UVLO)
• Compatible with Ceramic and Low ESR
Capacitors
• Low Electro Magnetic Interference(EMI)
Complies with EN55015 Standard ⁽¹⁾
• LED Open and Short Circuit Protections
• Thermal Shutdown and RoHS Compliant
• –40°C to +125˚C Junction Temperature Range
DESCRIPTION
The TPS92550 Constant Current Buck LED Driver
Micro-Module drives maximum 450mA LED current
up to 10 LEDs in a single string (maximum 14W). It
integrates all the power components including the
power inductor. The TPS92550 provides a full turn-
key, highly efficient solution for wide range of single
string LED lighting applications with up to 96% power
efficiency. It accepts an input voltage ranging from
4.5V to 36V and delivers a 350mA LED current as
default. The LED current is adjustable from 300mA to
450mA by changing a single external resistor.
The module operates at constant switching frequency
(400kHz) with low Electro Magnetic Interference
(EMI) complying with EN55015 standard. The module
has fast control loop to realize fine LED current pulse
yielding 256–step PWM dimming resolution at 240Hz
for general lighting. Protection feature include thermal
shutdown, input under-voltage lockout, LED open-
circuit and short-circuit protections. The TPS92550
Micro-Module is available in 7-pin PFM power
package.
Easy to Use 7-Pin Package
APPLICATIONS
• General Lighting, Desk Lamps
– Cabinet Lamps, Decorative Lamps
– Street Lamps
• Architecture Lighting, Recess Lights
– Spot Lights
– Underwater Lights
PACKAGE HIGHLIGHTS
• 7 Lead Easy-to-use Package (Similar to TO-
263)
• Single Exposed Die Attach Pad for Enhancing
Thermal Performance
• 10.2 x 13.8 x 4.6 mm Package
(1) EN55015, refer to Figure 35 and Figure 36
(1) θ_JA measured on a 1.705” x 3.0” four layer
board, with one ounce copper , thirty five
12 mil thermal vias, no air flow, and 1W
power dissipation.
Figure 1. 7-Pin PFM Package
10.16 x 13.77 x 4.57 mm (0.4 x 0.39 x 0.18 in)
θ_JA = 20°C/W, θ_JC = 1.9°C/W⁽¹⁾
RoHS Compliant
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated