TPS74201 Datasheet, PDF (1/34 Pages) Texas Instruments – 1.5A Ultra-LDO with Programmable Soft-Start

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS74201
SBVS064M – DECEMBER 2005 – REVISED OCTOBER 2015
TPS742 1.5-A Ultra-LDO With Programmable Soft-Start
1 Features
•1 Input Voltage Range: 0.8 V to 5.5 V
• Soft-Start (SS) Pin Provides a Linear Start-Up
With Ramp Time Set by External Capacitor
• 1% Accuracy Over Line, Load, and Temperature
• Supports Input Voltages as Low as 0.8 V With
External Bias Supply
• Adjustable Output (0.8 V to 3.6 V)
• Ultra-Low Dropout: 55 mV at 1.5 A (Typical)
• Stable With Any or No Output Capacitor
• Excellent Transient Response
• Available in 5-mm × 5-mm × 1-mm VQFN and
DDPAK/TO-263-7 Packages
• Open-Drain Power-Good (5 × 5 VQFN)
• Active High Enable
2 Applications
• FPGA Applications
• DSP Core and I/O Voltages
• Servers
• Post-Regulation Applications
• Applications With Special Start-Up Time or
Sequencing Requirements
Typical Application Adjustable Output Version
V_IN
V_BIAS
C_IN
1µF
C_BIAS
1µF
IN
PG
BIAS
EN ^{TPS74201 OUT}
SS
GND
FB
C_SS
R₃
R₁
C_OUT
R₂
Optional
V_OUT
3 Description
The TPS742 series of low-dropout (LDO) linear
regulators provide an easy-to-use, robust power-
management solution for a wide variety of
applications. User-programmable soft-start minimizes
stress on the input power source by reducing
capacitive inrush current on start-up. The soft-start is
monotonic and well suited for powering many
different types of processors and ASICs. The enable
input and power-good output allow easy sequencing
with external regulators. This complete flexibility
permits the user to configure a solution that meets
the sequencing requirements of FPGAs, DSPs, and
other applications with special start-up requirements.
A precision reference and error amplifier deliver 1%
accuracy over load, line, temperature, and process.
Each LDO is stable with low-cost ceramic output
capacitors, and the family is fully specified from
–40°C to 125°C. The TPS742 devices are offered in
a small (5 mm × 5 mm) VQFN package, yielding a
highly compact total solution size. For applications
that require additional power dissipation, the
DDPAK/TO-263 (KTW) package is also available.
PART
NUMBER
TPS74201
Device Information⁽¹⁾
PACKAGE
BODY SIZE (NOM)
VQFN (20)
5.00 mm × 5.00 mm
DDPAK/TO-263 (7) 8.89 mm × 10.10 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Turnon Response
1V/div
C_SS = 0mF
C_SS = 0.001mF
C_SS = 0.0047mF
V_OUT
1.2V
V_EN
1V/div _0V
Time (1ms/div)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.