TPS7201Q_16 Datasheet, PDF (1/42 Pages) Texas Instruments – MICROPOWER LOW-DROPOUT (LDO) VOLTAGE REGULATORS

TPS7201Q, TPS7225Q, TPS7230Q
TPS7233Q, TPS7248Q, TPS7250Q, TPS72xxY
MICROPOWER LOW-DROPOUT (LDO) VOLTAGE REGULATORS
SLVS102G – MARCH 1995 – REVISED JUNE 2000
D Available in 5-V, 4.85-V, 3.3-V, 3.0-V, and
2.5-V Fixed-Output and Adjustable Versions
D Dropout Voltage <85 mV Max at
I_O = 100 mA (TPS7250)
D Low Quiescent Current, Independent of
Load, 180 µA Typ
D 8-Pin SOIC and 8-Pin TSSOP Package
D Output Regulated to ± 2% Over Full
Operating Range for Fixed-Output Versions
D Extremely Low Sleep-State Current,
0.5 µA Max
D Power-Good (PG) Status Output
description
D, P, OR PW PACKAGE
(TOP VIEW)
SENSE^†/FB^‡ 1
RESET/PG 2
GND 3
EN 4
8 OUT
7 OUT
6 IN
5 IN
† _{SENSE – Fixed voltage options only}
(TPS7225, TPS7230, TPS7233, TPS7248,
and TPS7250)
‡ _{FB – Adjustable version only (TPS7201)}
600
TA = 25°C
500
The TPS72xx family of low-dropout (LDO) voltage
regulators offers the benefits of low-dropout
voltage, micropower operation, and miniaturized
400
packaging. These regulators feature extremely
TPS7225
TPS7230
low dropout voltages and quiescent currents
300
compared to conventional LDO regulators.
TPS7233
Offered in small-outline integrated-circuit (SOIC)
packages and 8-terminal thin shrink small-outline
200
TPS7248
(TSSOP), the TPS72xx series devices are ideal
for cost-sensitive designs and for designs where
board space is at a premium.
100
TPS7250
A combination of new circuit design and process
innovation has enabled the usual pnp pass
transistor to be replaced by a PMOS device.
Because the PMOS pass element behaves as a
0
0
50
100
150
200
250
IO – Output Current – mA
low-value resistor, the dropout voltage is very low
– maximum of 85 mV at 100 mA of load current
(TPS7250) – and is directly proportional to the
Figure 1. Typical Dropout Voltage Versus
Output Current
load current (see Figure 1). Since the PMOS pass
element is a voltage-driven device, the quiescent current is very low (300 µA maximum) and is stable over the
entire range of output load current (0 mA to 250 mA). Intended for use in portable systems such as laptops and
cellular phones, the low-dropout voltage and micropower operation result in a significant increase in system
battery operating life.
The TPS72xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current
to 0.5 µA maximum at T_J = 25°C. Other features include a power-good function that reports low output voltage
and may be used to implement a power-on reset or a low-battery indicator.
The TPS72xx is offered in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version
(programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2%
over line, load, and temperature ranges (3% for adjustable version).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1