TPS71501-Q1 Datasheet, PDF (1/20 Pages) Texas Instruments – 50-mA, 24-V, 3.2-mA Supply Current Low-Dropout Linear Regulators

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS71501-Q1, TPS71525-Q1, TPS71530-Q1, TPS71533-Q1, TPS71550-Q1
SGLS272H – OCTOBER 2004 – REVISED DECEMBER 2015
TPS715xx-Q1 50-mA, 24-V, 3.2-μA Supply Current
Low-Dropout Linear Regulators in SC70 Package
1 Features
•1 Qualified for Automotive Applications
– Automotive Grade 1 (Q-temperature Range)
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• 24-V Maximum Input Voltage
• Low 3.2-μA Quiescent Current at 50 mA
• Stable With Any Capacitor (> 0.47 μF)
• 50-mA Low-Dropout Regulator
• Available in 2.5 V, 3 V, 3.3 V, 5 V, and Adjustable
(1.2 V to 15 V)
• Minimum and Maximum Specified Current Limit
• 5-Pin SC70 and SOT (DCK) Package
• –40°C to 125°C Specified Junction Temperature
Range
2 Applications
• Ultra-Low-Power Microcontrollers
• Cellular and Cordless Handsets
• Portable- and Battery-Powered Equipment
3 Description
The TPS715xx-Q1 low-dropout (LDO) voltage
regulators offer the benefits of high input voltage,
LDO voltage, low-power operation, and miniaturized
packaging. The devices, which operate over an input
range of 2.5 V to 24 V, are stable with any capacitor
(>0.47 μF). The LDO voltage and low quiescent
current allow operations at extremely low power
levels. Therefore, the devices are ideal for powering
battery-management ICs. Specifically, since the
devices are enabled as soon as the applied voltage
reaches the minimum input voltage, the output is
quickly available to power continuously operating
battery-charging ICs.
The usual PNP pass transistor has been replaced by
a PMOS pass element. Because the PMOS pass
element behaves as a low-value resistor, the LDO
voltage, typically 415 mV at 50 mA of load current, is
directly proportional to the load current. The low
quiescent current (3.2 μA typical) is stable over the
entire range of output load current (0 mA to 50 mA).
Table 1. Device Information⁽¹⁾⁽²⁾
PART NUMBER
PACKAGE
TPS715xx-Q1
SC70 (5)
BODY SIZE (NOM)
2.00 mm × 1.25 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) Contact Texas Instruments for other voltage options between
1.25 V and 5.85 V.
Simplified Schematic
IN
OUT
TPS715xx
Li–
MSP430
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.