English
Language : 

TPS65000_15 Datasheet, PDF (1/40 Pages) Texas Instruments – Step-Down Converter
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS65000, TPS65001, TPS650001
TPS650003, TPS650006, TPS650061
SLVS810C – JUNE 2009 – REVISED SEPTEMBER 2015
TPS6500xx 2.25-MHz Step-Down Converter With Dual Low Dropouts and Supply Voltage
Supervisor
1 Features
•1 Step-Down Converters:
– VIN Range From 2.3 V to 6 V
– Spread Spectrum Clock (SSC) Generation for
Reduced EMI
– 2.25-MHz Fixed Frequency Operation
– 600-mA or 1-A (TPS650061) Output Current
• Low Dropouts (LDOs):
– VIN Range From 1.6 V to 6 V
– Adjustable Output Voltage
– Up to 300-mA Output Current
– Separate Power Inputs and Enables
• Supply Voltage Supervisor (TPS65001)
– Manual Reset Input for Push Button
– Adjustable Reset Time
– Adjustable Reset Voltage
• 3-mm × 3-mm 16-Pin WQFN (TPS65000)
• 3-mm × 3-mm 20-Pin WQFN (TPS65001)
2 Applications
• Points-of-Load
• Embedded Processor Power
• Cell Phones
• Smart Phones
• PDAs
• Pocket PCs
• Portable Media Players
3 Description
The TPS6500xx devices are single-chip power
management (PWM) ICs for portable applications.
Both devices combine a single step-down converter
with two low-dropout (LDO) regulators. The step-
down converter enters a low-power mode at light load
for maximum efficiency across the widest possible
range of load currents. For low-noise applications, the
devices can be forced into fixed-frequency PWM
through a pin. The step-down converter is small
because of its small inductor and capacitors. The
step-down converter has power good status output
for sequencing. The LDOs can supply 300 mA and
operate with an input voltage range from 1.6 V to 6 V.
A step-down converter or main battery can power the
LDOs directly. The step-down converter and the
LDOs have separate voltage inputs that enable
maximum design and sequencing flexibility.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS65000,
TPS650001,
TPS650003,
TPS650006
WQFN (16)
3.00 mm × 3.00 mm
TPS65001,
TPS650061
WQFN (20)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Application Circuit
TPS65000/1
Oscillator
SSCG
VIN
475kW
VIN
232kW
A
VDCDC
10mF
A
P
0.1mF
470kW
A
VIN
100nF
AA
EN_DCDC
VINDCDC
MODE
RSTSNS
MR
TRST
EN_LDO1
VINLDO1
EN_LDO2
VINLDO2
AGND
A
Step-Down
600mA
SW
FB_DCDC
Supply
Voltage
Supervisor
LDO1
300mA
LDO2
300mA
PG
RST
VLDO1
FB_LDO1
VLDO2
FB_LDO2
PGND
Bandgap Reference
2.2mH
680W
150kW
A
22pF
470kW
180kW
A
820kW
180kW
P
A
10mF
P
470kW
10mF
P
10mF
P
VDCDC
3.3V
VIN
100kW
PG
RST
VLDO1
1.8V
VLDO2
2.8V
TPS65000/01 Joint Function/Pin
TPS65001 Only Function/Pin
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.