|
TPS62400-Q1 Datasheet, PDF (1/42 Pages) Texas Instruments – 2.25-MHz 400-mA and 600-mA Dual Step-Down Converter | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS62400-Q1, TPS62402-Q1, TPS62404-Q1, TPS62405-Q1
SLVSA67E â FEBRUARY 2010 â REVISED JUNE 2015
TPS6240x-Q1 2.25-MHz 400-mA and 600-mA Dual Step-Down Converter
1 Features
â¢1 Qualified for Automotive Applications
⢠AEC-Q100 Qualified With the Following Results:
â Device Temperature Grade 1: â40°C to 125°C
Operating Junction Temperature Range
â Device HBM ESD Classification Level H2
â Device CDM ESD Classification Level C4B
⢠High EfficiencyâUp to 95%
⢠VIN Range From 2.5 V to 6 V
⢠2.25-MHz Fixed-Frequency Operation
⢠Output Current 400 mA and 600 mA
⢠Adjustable Output Voltage From 0.6 V to VIN
⢠Pin Selectable Output Voltage Supports Simple
Dynamic Voltage Scaling
⢠EasyScale⢠Optional One-Pin Serial Interface
⢠Power-Save Mode at Light Load Currents
⢠180° Out-of-Phase Operation
⢠Output-Voltage Accuracy in PWM Mode ±1%
⢠Typical 32-μA Quiescent Current for Both
Converters
⢠100% Duty Cycle for Lowest Dropout
2 Applications
⢠Automotive
⢠Point of Load Regulator (POL)
⢠Car Infotainment and Navigation Systems
⢠ADAS Applications
VIN 2.5 V to 6 V
10 µF
Simplified Schematic
TPS62402-Q1
VIN
FB1
SW1
2.2 µH
VOUT1 = 1.2 V
400 mA
DEF_1
EN1
10 µF
EN2
MODE/
DATA
SW2
2.2 µH
ADJ2
GND
VOUT2 = 3.3 V
600 mA
10 µF
3 Description
The TPS6240x-Q1 family of devices are synchronous
dual step-down DC-DC converters optimized for
battery-powered portable applications and automotive
systems. They provide two independent output
voltage rails powered by rechargeable batteries or
standard 3.3-V or 5-V voltage rail.
The EasyScale⢠serial interface allows output-
voltages modification during operation. The fixed-
output-voltage versions, TPS62402-Q1,
TPS62404-Q1, and TPS62405-Q1 support one-pin-
controlled simple dynamic voltage scaling for low-
power processors.
The TPS6240x-Q1 operates at 2.25-MHz fixed
switching frequency and enters the power-save mode
operation at light load currents to maintain high
efficiency over the entire load-current range. For low-
noise applications, one can force the devices into
fixed-frequency PWM mode by pulling the
MODE/DATA pin high. The shutdown mode reduces
the current consumption to 1.2-μA, typical. The
devices allow the use of small inductors and
capacitors to achieve a small solution size.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS62400-Q1
TPS62402-Q1
TPS62404-Q1
VSON (10)
3.00 mm à 3.00 mm
TPS62405-Q1
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
TPS62402-Q1 Efficiency vs Output Current, VOUT1
and VOUT2
100
90
80
VIN = 3.7 V
VIN = 4.2 V
VOUT2 = 3.3 V
MODE/DATA = Low
70
60
50
40
30
20
10
0
0.01
VIN = 3.7 V
VIN = 4.2 V
VOUT1 = 1.2 V
MODE/DATA = Low
VIN = 3.7 V
VIN = 4.2 V
VOUT2 = 3.3 V
MODE/DATA = High
VIN = 3.7 V
VIN = 4.2 V
VOUT2 = 1.2 V
MODE/DATA = High
0.1
1
10
100
1000
Output Current (mA)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.
|
▷ |