TPS62160-Q1 Datasheet, PDF (1/32 Pages) Texas Instruments – 3-V to 17-V 1-A Step-Down Converter with DCS-Control

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS62160-Q1
SLVSCK6 – DECEMBER 2014
TPS62160-Q1 3-V to 17-V 1-A Step-Down Converter with DCS-Control™
1 Features
•1 DCS-Control™ Topology
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade: –40°C to 125°C
Operating Junction Temperature Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Input Voltage Range: 3 V to 17 V
• Up to 1-A Output Current
• Adjustable Output Voltage from 0.9 V to 6 V
• Fixed Output Voltage Versions
• Seamless Power Save Mode Transition
• Typically 17-µA Quiescent Current
• Power Good Output
• 100% Duty Cycle Mode
• Short Circuit Protection
• Over Temperature Protection
• Available in a 2 × 2 mm WSON-8 Package
2 Applications
• Automotive 12-V Rail Supplies
• POE Over Coax POL Supply
• Camera, Video Modules
• LDO Alternative
3 Description
The TPS62160-Q1 is an easy to use synchronous
step down DC-DC converter optimized for
applications with high power density. A high switching
frequency of typically 2.25 MHz allows the use of
small inductors and provides fast transient response
as well as high output voltage accuracy by utilization
of the DCS-Control™ topology.
With their wide operating input voltage range of 3 V
to 17 V, the devices are ideally suited for systems
powered from either a Li-Ion or other battery as well
as from 12-V intermediate power rails. It supports up
to 1-A continuous output current at output voltages
between 0.9 V and 6 V (with 100% duty cycle mode).
Power sequencing is also possible by configuring the
Enable and open-drain Power Good pins.
In Power Save Mode, the devices draw quiescent
current of about 17 μA from VIN. Power Save Mode,
entered automatically and seamlessly if load is small,
maintains high efficiency over the entire load range.
In Shutdown Mode, the device is turned off and
shutdown current consumption is less than 2 μA.
The device is packaged in an 8-pin WSON package
measuring 2 × 2 mm (DSG).
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS62160-Q1
WSON (8)
2.00 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
4 Simplified Schematic
VIN
10uF
VIN
SW
EN
VOS
TPS62160-Q1
AGND
PG
PGND
FB
2.2µH
100k
470k
150k
3.3V / 1A
22uF
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.