TPS62130A-Q1_016 Datasheet, PDF (1/37 Pages) Texas Instruments – 3-V to 17-V 3-A Step-Down Converter with DCS-Control

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS62130A-Q1, TPS62133A-Q1, TPS6213013A-Q1
SLVSCC2B – MAY 2014 – REVISED NOVEMBER 2016
TPS6213xA-Q1 3-V to 17-V 3-A Step-Down Converter with DCS-Control™
1 Features
•1 DCS-Control™ Topology
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade: –40°C to 125°C
Operating Junction Temperature Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Input Voltage Range: 3 to 17V
• Adjustable Output Voltage from 0.9 to 6V
• Pin-Selectable Output Voltage (nominal, + 5%)
• Programmable Soft Start and Tracking
• Seamless Power Save Mode Transition
• Quiescent Current of 17µA (typ.)
• Power Good Output
• 100% Duty Cycle Mode
• Short Circuit Protection
• Over Temperature Protection
• Pin to Pin Compatible with TPS62150A-Q1
• Available in a 3 × 3 mm, VQFN-16 Package
2 Applications
• Automotive POL supply
• Infotainment, CAN-, USB- power supply
• Embedded Systems,
• LDO Replacement
3 Description
The TPS6213XA-Q1 devices are easy-to-use
synchronous step-down DC-DC converters optimized
for applications with high power density. A high
switching frequency of typically 2.5 MHz allows the
use of small inductors and provides fast transient
response as well as high output-voltage accuracy
through the use of the DCS-Control™ topology.
With a wide operating input-voltage range of 3 to 17
V, the devices are ideally suited for systems powered
from intermediate bus power rails. The devices
support up to 3-A continuous output current at output
voltages between 0.9 V and 6 V (with 100% duty
cycle mode).
The output-voltage startup ramp is controlled by the
soft-start pin, which allows operation as either a
standalone power supply or in tracking configurations.
Power sequencing is also possible by configuring the
enable and open-drain power-good pins.
In power save mode, the devices show quiescent
current of about 17 μA from V_IN. Power save mode
which is entered automatically and seamlessly if the
load is small, maintains high efficiency over the entire
load range. In shutdown mode, the devices are
turned off and shutdown current consumption is less
than 2 μA. The devices are packaged in a 16-pin
VQFN package measuring 3 × 3 mm (RGT).
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS62130A-Q1
TPS62133A-Q1
VQFN (16)
3.00 mm x 3.00 mm
TPS6213013A-Q1
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Typical Application Schematic
Efficiency vs Output Current
space
(3 .. 17)V
10uF
PVIN
1 / 2.2 µH
SW
AVIN
VOS
0.1uF
EN
PG
TPS62130A-Q1
SS/TR
FB
3.3nF
DEF
AGND
FSW
PGND
100k
510k
240k
2.5V / 3A
22uF
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.