TPS61193-Q1_16 Datasheet, PDF (1/10 Pages) Texas Instruments – TPS61193-Q1 Low-EMI Automotive LED Driver With Three 100-mA Channels

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS61193-Q1
SNVSAM9 – AUGUST 2016
TPS61193-Q1 Low-EMI Automotive LED Driver With Three 100-mA Channels
1 Features
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
• Input Voltage Operating Range 4.5 V to 40 V
• Three High-Precision Current Sinks
– Current Matching 1% (Typical)
– LED String Current up to 100 mA per Channel
– Outputs can be Combined Externally for
Higher Current Capability
• High Dimming Ratio of 10 000:1 at 100 Hz
• Integrated Boost/SEPIC for LED String Power
– Output Voltage up to 45 V
– Switching Frequency 300 kHz to 2.2 MHz
– Switching Synchronization Input
– Spread Spectrum for Lower EMI
• Extensive Fault Detection Features
– Fault Output
– Input Voltage OVP, UVLO, and OCP
– Open and Shorted LED Fault Detection
– Thermal Shutdown
• Minimum Number of External Components
space
VIN 4.5...40 V
Simplified Schematic
L1
D1
VOUT up to 45 V
C_IN
C_OUT
SW
R2
R1
BRIGHTNESS
EN
FB
VIN
CLDO
RFSET
LDO
OUT1
TPS61193-Q1
OUT2
FSET
OUT3
SYNC
PWM
VDDIO/EN
FAULT
ISET
PGND GND PAD
C_FB
Up to 100 mA/string
RISET
Copyright © 2016, Texas Instruments Incorporated
1
2 Applications
• Backlight for:
– Automotive Infotainment
– Automotive Instrument Clusters
– Smart Mirrors
– Heads-Up Displays (HUD)
– Central Information Displays (CID)
– Audio-Video Navigation (AVN)
3 Description
The TPS61193-Q1 is an automotive high-efficiency,
low-EMI, easy-to-use LED driver with an integrated
DC-DC converter. The DC-DC converter supports
both boost and SEPIC mode operation. The device
has three high-precision current sinks that can be
combined for higher current capability.
The DC-DC converter has adaptive output voltage
control based on the LED current sink headroom
voltages. This feature minimizes the power
consumption by adjusting the voltage to the lowest
sufficient level in all conditions. For EMI reduction
DC-DC supports spread spectrum for switching
frequency and an external synchronization with
dedicated pin. A wide-rage adjustable frequency
allows the TPS61193-Q1 to avoid disturbance for AM
radio bands.
The input voltage range for the TPS61193-Q1 is from
4.5 V to 40 V to support automotive stop/start and
load dump condition. The TPS61193-Q1 integrates
extensive fault detection features.
To request a full data sheet or other design
resources: request TPS61193-Q1.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS61193-Q1
HTSSOP (20)
6.50 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
100
95
90
85
80
75
70
65
60
55
50
0
System Efficiency
VIN=5V
VIN=8V
VIN=12V
VIN=16V
10 20 30 40 50 60 70 80 90 100
Brightness (%)
D001
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.