TPS54373PWPRG4 Datasheet, PDF (1/21 Pages) Texas Instruments – 3-V TO 6-V INPUT, 3-A OUTPUT SYNCHRONOUS BUCK SWITCHER

www.ti.com
Typical Size
6,4 mm X 6,6 mm
TPS54373
SLVS455B − JANUARY 2003 − REVISED FEBRUARY 2005
3-V TO 6-V INPUT, 3-A OUTPUT SYNCHRONOUS BUCK
SWITCHER WITH DISABLED SINKING DURING START-UP
FEATURES
D 60-mΩ MOSFET Switches for High Efficiency
at 3-A Continuous Output Source or Sink
Current
D Disabled Current Sinking During Start-Up
D Adjustable Output Voltage Down to 0.9 V
With 1.0% Accuracy
D Wide PWM Frequency:
Fixed 350 kHz, 550 kHz or
Adjustable 280 kHz to 700 kHz
D Synchronizable to 700 kHz
D Load Protected by Peak Current Limit and
Thermal Shutdown
D Integrated Solution Reduces Board Area and
Component Count
APPLICATIONS
D Low-Voltage, High-Density Distributed Power
Systems
D Point of Load Regulation for
High-Performance DSPs, FPGAs, ASICs, and
Microprocessors
D Broadband, Networking, and Optical
Communications Infrastructure
D Power PC Series Processors
DESCRIPTION
As a member of the SWIFT™ family of dc/dc regulators,
the TPS54373 low-input voltage, high-output current,
synchronous buck PWM converter integrates all
required active components. Included on the substrate
with the listed features are a true, high-performance,
voltage error amplifier that enables maximum
performance and flexibility in choosing the output filter
L and C components; an undervoltage-lockout circuit to
prevent start-up until the input voltage reaches 3 V; an
internally or externally set slow-start circuit to limit
in-rush currents; and a power-good output useful for
processor/logic reset, fault signaling, and supply
sequencing.
For reliable power up in output precharge applications,
the TPS54373 is designed to only source current during
start-up.
The TPS54373 is available in a thermally enhanced
20-pin TSSOP (PWP) PowerPAD™ package, which
eliminates bulky heatsinks. TI provides evaluation
modules and the SWIFT™ designer software tool to aid
in quickly achieving high-performance power supply
designs to meet aggressive equipment development
cycles.
TYPICAL APPLICATION
*
*
I/O Supply
VIN
PH
TPS54373
BOOT
PGND
VBIAS ^VSENSE
AGND COMP
Core Supply
START-UP WAVEFORM
R_L = 1 Ω
V_I = 3.3 V
V_O = 1.8 V
* Optional
5.0 ms/div
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD and SWIFT are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright © 2003, Texas Instruments Incorporated