TPS53667 Datasheet, PDF (1/11 Pages) Texas Instruments – 6-Phase, D-CAP+, Step-Down, Buck Controller with NVM and PMBus Interface for ASIC Power and High-Current Point-of-Load

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS53667
SLUSC40 – JULY 2016
TPS53667 6-Phase, D-CAP+, Step-Down, Buck Controller with NVM
and PMBus™ Interface for ASIC Power and High-Current Point-of-Load
Check for Samples: TPS53667
1 Features
•1 8-bit Selectable BOOT Voltage via Pinstrap or
NVM: 0.5 V to 2.5 V (down to 5-mV Step)
• 1-, 2-, 3-, 4-, 5-, or 6- Phase Operation
• PMBus™ System Interface for Telemetry of
Voltage, Current, Power, Temperature, and Fault
Conditions
• 1.8-V and 3.3-V PMBus Bias Compatible
• Fault Reporting: Output Voltage, Output Current,
and Temperature
• Configurable with Non-Volatile Memory (NVM) or
Resistor Pinstrap
• 16 Levels of Programmable OCP with Pinstrap or
NVM
• Fast Transient with DCAP+™Control
• Optimized Efficiency at Light and Heavy Loads
• Support Pre-Bias Startup
• 8 Independent Levels of Overshoot Reduction
(OSR) and Undershoot Reduction (USR)
• Driverless Configuration for Efficient High-
Frequency Switching
• Compatible with CSD95490BQ5MC NexFET™
Power Stage
• Accurate, Adjustable Voltage Positioning
• 300-kHz to 1-MHz Frequency Selections with
Closed-loop Frequency Control
• Patented AutoBalance™ Phase Balancing
• Dynamic Phase Shedding with Programmable
Current Threshold
• Conversion Voltage Range: 4.5 V to 17 V
• Small, 6 mm × 6 mm, 40-Pin, QFN, PowerPAD™
Package
3 Description
The TPS53667 is a high-current, multi-phase, step-
down controller. The device offers built-in non volatile
memory (NVM) and PMBus interface. It is fully
compatible with the NexFET power stage
(CSD95490BQ5MC). The TPS53667 provides 8-bit
BOOT voltage selection covering output voltage from
0.5 V to 2.5 V, with steps as small as 5 mV, which is
ideal for high current application with accurate output
voltage setting. Advanced control features such as D-
CAP+ architecture with undershoot reduction (USR)
and overshoot reduction (OSR) provide fast transient
response, lowest output capacitance, and high
efficiency. The TPS53667 also provides novel phase
interleaving strategy and dynamic phase shedding for
efficiency improvement at light loads. In addition, the
TPS53667 supports the PMBus communication
interface with systems for telemetry of voltage,
current, power, temperature, and fault conditions.
Some of the configurations can be programmed by
pinstrap or PMBus and stored in non-volatile memory
to minimize the external component count.
The TPS53667 is offered in a space saving, thermally
enhanced 40-pin QFN package and is rated to
operate from –40°C to 125°C.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS53667
QFN (40)
6.00 mm × 6.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
TPS53667
PWM1
CSP1
Power
Stage
2 Applications
• Application-Specific Integrated Circuit (ASIC)
Power in Communications Equipment
• High Density Power Solutions
• Server Power
• Smart Power Systems
PMBus
PWM2
CSP2
PWM6
CSP6
Power
Stage
Power
Stage
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCT PREVIEW Information. Product in design phase of
development. Subject to change or discontinuance without notice.