|
TPS51200-Q1_15 Datasheet, PDF (1/36 Pages) Texas Instruments – Sink and Source DDR Termination Regulator | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
TPS51200-Q1
SLUS984B â NOVEMBER 2009 â REVISED SEPTEMBER 2015
TPS51200-Q1 Sink and Source DDR Termination Regulator
1 Features
â¢1 Qualified for Automotive Applications
⢠AEC-Q100 Test Guidance With the Following
Results:
â Device Temperature Grade 1: â40°C to 125°C
Ambient Operating Temperature
â Device HBM ESD Classification Level 2
â Device CDM ESD Classification Level C4B
⢠Input Voltage: Supports 2.5-V Rail and 3.3-V Rail
⢠VLDOIN Voltage Range: 1.1 V to 3.5 V
⢠Sink/Source Termination Regulator Includes
Droop Compensation
⢠Requires Minimum Output Capacitance of 20-μF
(typically 3 à 10-μF MLCCs) for Memory
Termination Applications (DDR)
⢠PGOOD to Monitor Output Regulation
⢠EN Input
⢠REFIN Input Allows for Flexible Input Tracking
Either Directly or Through Resistor Divider
⢠Remote Sensing (VOSNS)
⢠±10-mA Buffered Reference (REFOUT)
⢠Built-in Soft Start, UVLO and OCL
⢠Thermal Shutdown
⢠Meets DDR, DDR2 JEDEC Specifications;
Supports DDR3 and Low-Power DDR3 and DDR4
VTT Applications
⢠VSON-10 Package With Exposed Thermal Pad
2 Applications
⢠Memory Termination Regulator for DDR, DDR2,
DDR3, and Low Power DDR3/DDR4
⢠Notebook, Desktop, Server
⢠Telecom and Datacom, GSM Base Station, LCD-
TV and PDP-TV, Copier and Printer, Set-Top Box
3 Description
The TPS51200-Q1 device is a sink and source
double-data-rate (DDR) termination regulator
specifically designed for low input voltage, low-cost,
low-noise systems where space is a key
consideration.
The TPS51200-Q1 device maintains a fast transient
response and only requires a minimum output
capacitance of 20 μF. The TPS51200-Q1 device
supports a remote sensing function and all power
requirements for DDR, DDR2, DDR3, and Low Power
DDR3 and DDR4 VTT bus termination.
In addition, the TPS51200-Q1 device provides an
open-drain PGOOD signal to monitor the output
regulation and an EN signal that can be used to
discharge VTT during S3 (suspend to RAM) for DDR
applications.
The TPS51200-Q1 device is available in the
thermally-efficient VSON-10 package, and is rated
both green and Pb-free. The device is specified from
â40°C to 125°C.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS51200-Q1
VSON (10)
3.00 mm à 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Standard DDR Application
VDDQ
TPS51200-Q1
1 REFIN
VIN 10
3.3 VIN
VLDOIN
VTT
2 VLDOIN PGOOD 9
3 VO
GND 8
4 PGND
EN 7
5 VOSNS REFOUT 6
PGOOD
SLP_S3
VTTREF
0.1 µF
UDG-08025
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |