TPS40050-Q1_16 Datasheet, PDF (1/35 Pages) Texas Instruments – WIDE-INPUT SYNCHRONOUS BUCK CONTROLLER

www.ti.com
TPS40050ĆQ1
TPS40051ĆQ1
8
TPS40053ĆQ1
SGLS219A − NOVEMBER 2003 − REVISED MAY 2008
WIDEĆINPUT SYNCHRONOUS
BUCK CONTROLLER
FEATURES
D Qualified for Automotive Applications
D Operating Input Voltage 8 V to 40 V
D Input Voltage Feed-Forward Compensation
D < 1 % Internal 0.7-V Reference
D Programmable Fixed-Frequency Up to 1 MHz
Voltage Mode Controller
D Internal Gate Drive Outputs for High-Side and
Synchronous N-Channel MOSFETs
D 16-Pin PowerPADt Package (θ_JC = 2°C/W)
D Thermal Shutdown
D Externally Synchronizable
D Programmable High-Side Current Limit
D Programmable Closed-Loop Soft-Start
D TPS40050 Source Only
D TPS40051 Source/Sink
D TPS40053 Source/Sink With V_OUT Prebias
APPLICATIONS
D Power Modules
D Networking/Telecom
D Industrial
D Servers
DESCRIPTION
The TPS4005x is a family of high-voltage, wide input
(8 V to 40 V), synchronous, step-down converters.
The TPS4005x family offers design flexibility with a
variety of user programmable functions, including
soft-start, UVLO, operating frequency, voltage feed-
forward, high-side current limit, and loop compensation.
The TPS4005x are also synchronizable to an external
supply. They incorporate MOSFET gate drivers for
external N-channel high-side and synchronous rectifier
(SR) MOSFETs. Gate drive logic incorporates
anti-cross conduction circuitry to prevent simultaneous
high-side and synchronous rectifier conduction.
The TPS4005x uses voltage feed-forward control
techniques to provide good line regulation over the wide
(4:1) input voltage range, and fast response to input line
transients with near constant gain with input variation
which eases loop compensation.
The externally programmable current limit provides
pulse-by-pulse current limit, as well as hiccup mode
operation utilizing an internal fault counter for longer
duration overloads.
ORDERING INFORMATION^†
TA
APPLICATION
PACKAGE^‡
PART NUMBER
SOURCE^¶
Plastic HTSSOP (PWP)^§
TPS40050QPWPRQ1
−40°C to 125°C
SOURCE/SINK^¶
Plastic HTSSOP (PWP)^§
TPS40051QPWPRQ1
SOURCE/SINK^¶ with prebias
Plastic HTSSOP (PWP)^§
TPS40053QPWPRQ1
† _{For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at}
http://www.ti.com.
‡ _{Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.}
§ _{This PWP package is taped and reeled as indicated by the R suffix on the device type (i.e., TPS40050QPWPRQ1). See the application section}
of the data sheet for PowerPAD drawing and layout information.
¶ _{See Application Information section, pg. 8}
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPADt is trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright  2008 Texas Instruments Incorporated