TPS2811_15 Datasheet, PDF (1/40 Pages) Texas Instruments – DUAL HIGH-SPEED MOSFET DRIVERS

TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGHĆSPEED MOSFET DRIVERS
SLVS132F − NOVEMBER 1995 − REVISED OCTOBER 2004
D Industry-Standard Driver Replacement
D 25-ns Max Rise/Fall Times and 40-ns Max
Propagation Delay − 1-nF Load, V_CC = 14 V
D 2-A Peak Output Current, V_CC = 14 V
D 5-µA Supply Current — Input High or Low
D 4-V to 14-V Supply-Voltage Range; Internal
Regulator Extends Range to 40 V (TPS2811,
TPS2812, TPS2813)
D −40°C to 125°C Ambient-Temperature
Operating Range
TPS2811, TPS2812, TPS2813 . . . D, P, AND PW
PACKAGES
(TOP VIEW)
REG_IN 1
1IN 2
GND 3
2IN 4
8 REG_OUT
7 1OUT
6 V_CC
5 2OUT
TPS2814 . . . D, P, AND PW PACKAGES
(TOP VIEW)
description
The TPS28xx series of dual high-speed MOSFET
drivers are capable of delivering peak currents of 2 A
into highly capacitive loads. This performance is
achieved with a design that inherently minimizes
shoot-through current and consumes an order of
magnitude less supply current than competitive
products.
The TPS2811, TPS2812, and TPS2813 drivers include
a regulator to allow operation with supply inputs
between 14 V and 40 V. The regulator output can power
other circuitry, provided power dissipation does
1IN1 1
1IN2 2
2IN1 3
2IN2 4
8 GND
7 1OUT
6 V_CC
5 2OUT
TPS2815 . . . D, P, AND PW PACKAGES
(TOP VIEW)
1IN1 1
1IN2 2
2IN1 3
2IN2 4
8 GND
7 1OUT
6 V_CC
5 2OUT
not exceed package limitations. When the regulator is not required, REG_IN and REG_OUT can be left disconnected
or both can be connected to V_CC or GND.
The TPS2814 and the TPS2815 have 2-input gates that give the user greater flexibility in controlling the MOSFET.
The TPS2814 has AND input gates with one inverting input. The TPS2815 has dual-input NAND gates.
TPS281x series drivers, available in 8-pin PDIP, SOIC, and TSSOP packages operate over a ambient temperature
range of −40°C to 125°C.
AVAILABLE OPTIONS
TA
INTERNAL
REGULATOR
LOGIC FUNCTION
PACKAGED DEVICES
SMALL
OUTLINE
(D)
PLASTIC
DIP
(P)
TSSOP (PW)
− 40°C
to
125°C
Dual inverting drivers
Yes
Dual noninverting drivers
One inverting and one noninverting driver
TPS2811D TPS2811P TPS2811PW
TPS2812D TPS2812P TPS2812PW
TPS2813D TPS2813P TPS2813PW
No
Dual 2-input AND drivers, one inverting input on each driver
Dual 2-input NAND drivers
TPS2814D TPS2814P TPS2814PW
TPS2815D TPS2815P TPS2815PW
The D package is available taped and reeled. Add R suffix to device type (e.g., TPS2811DR). The PW package is only available left-end
taped and reeled and is indicated by the R suffix on the device type (e.g., TPS2811PWR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright  2002, Texas Instruments Incorporated
1