TPS23753A Datasheet, PDF (1/30 Pages) Texas Instruments – IEEE 802.3 PoE INTERFACE AND CONVERTER CONTROLLER WITH ENHANCED ESD IMMUNITY

TPS23753A
www.ti.com
SLVS933B – JULY 2009 – REVISED JANUARY 2010
IEEE 802.3 PoE INTERFACE AND CONVERTER CONTROLLER WITH ENHANCED ESD
IMMUNITY
FEATURES
1
• Enhanced ESD Ride-Through Capability
• Optimized for Isolated Converters
• Complete PoE Interface
• Adapter ORing Support
• 12 V Adapter Support
• Programmable Frequency with Synch.
• Robust 100 V, 0.7 Ω Hotswap MOSFET
• Small TSSOP 14 Package
• 15 kV / 8 kV System Level ESD Capable
• –40°C to 125°C Junction Temperature Range
• Design Procedure Application Note - SLVA305
• Adapter ORing Application Note - SLVA306
APPLICATIONS
• IEEE 802.3at Compliant Powered Devices
• VoIP Telephones
• Access Points
• Security Cameras
DESCRIPTION
The TPS23753A is a combined Power over Ethernet
(PoE) powered device (PD) interface and
current-mode dc/dc controller optimized specifically
for isolated converter designs. The PoE
implementation supports the IEEE 802.3at standard
as a 13 W type 1 PD. The requirements for an IEEE
802.3at type 1 device are a superset of IEEE
802.3-2008 (originally IEEE 802.3af).
The TPS23753A supports a number of input-voltage
ORing options including highest voltage, external
adapter preference, and PoE preference.
The PoE interface features an external detection
signature pin that can also be used to disable the
internal hotswap MOSFET. This allows the PoE
function to be turned off. Classification can be
programmed to any of the defined types with a single
resistor.
The dc/dc controller features a bootstrap startup
mechanism with an internal, switched current source.
This provides the advantages of cycling overload fault
protection without the constant power loss of a pull up
resistor.
The programmable oscillator may be synchronized to
a higher-frequency external timing reference. The
TPS23753A features improvements for uninterrupted
device operation through an ESD event.
BR1
BR2
*
D_A
Adapter
R _APD1
DEN
CLS
V _SS
APD
FRS
V_C
V_B
GATE
CS
CTL
*
D _VC
M1
C _IN
R _VC
V_B
R _CTL
* Adapter interface and R _BLNK are Optional
Figure 1. Basic TPS23753A Implementation
T1
D_S
C _OUT
C _CTL
R _OB
C _IZ
C_{IO TLV431}
V _OUT
R _FBU
R _FBL
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated