TPS22924CYZPRB Datasheet, PDF (1/20 Pages) Texas Instruments – ULTRA-SMALL, LOW-INPUT-VOLTAGE, LOW rON LOAD SWITCH

TPS22924C
www.ti.com
SLVSA52C – NOVEMBER 2009 – REVISED JUNE 2013
ULTRA-SMALL, LOW-INPUT-VOLTAGE, LOW r_ON LOAD SWITCH
Check for Samples: TPS22924C
FEATURES
1
• Integrated Single Load Switch
• Input Voltage: 0.75 V to 3.6 V
• Ultra-Low ON Resistance
– r_ON = 18.3 mΩ at V_IN = 3.6 V
– r_ON = 18.5 mΩ at V_IN = 2.5 V
– r_ON = 19.6 mΩ at V_IN = 1.8 V
– r_ON = 19.4 mΩ at V_IN = 1.2 V
– r_ON = 20.3 mΩ at V_IN = 1.0 V
– r_ON = 22.7 mΩ at V_IN = 0.75 V
• Ultra Small CSP-6 package
0.9 mm x 1.4 mm, 0.5-mm Pitch
• 2-A Maximum Continuous Switch Current
• Low Shutdown Current
• Low Threshold Control Input
• Controlled Slew Rate to Avoid Inrush Currents
• Quick Output Discharge Transistor
• ESD Performance Tested Per JESD 22
– 5000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
APPLICATIONS
• Battery Powered Equipment
• Portable Industrial Equipment
• Portable Medical Equipment
• Portable Media Players
• Point Of Sales Terminal
• GPS Devices
• Digital Cameras
• Netbooks / Notebooks
• Smartphones
DESCRIPTION
The TPS22924C is a small, ultra-low r_ON load switch
with controlled turn on. The devices contain N-
channel MOSFETs that can operate over an input
voltage range of 0.75 V to 3.6 V. An integrated
charge pump biases the NMOS switch to achieve a
minimum switch ON resistance. The switch is
controlled by an on/off input (ON), which is capable of
interfacing directly with low-voltage control signals.
A 1250-Ω on-chip load resistor is added for output
quick discharge when switch is turned off. The rise
time of the device is internally controlled to avoid
inrush current. The TPS22924C features a rise time
of 800 µs at 3.6 V.
The TPS22924C is available in an ultra-small space-
saving 6-pin CSP package and is characterized for
operation over the free-air temperature range of
–40ºC to 85ºC.
Figure 1. TYPICAL APPLICATION
SMPS
C_IN = 1 µF ^CL
V_IN
ON
OFF
TPS22924C
V_OUT
GND
GND
NOTE: SMPS = Switched-mode power supply
LOAD
C_L
R_L
GND
Table 1. FEATURE LIST
TPS22924C
r_ON (TYP)
AT 3.6 V
18.3 mΩ
SLEW RATE (TYP)
AT 3.6 V
800 μs
QUICK OUTPUT
DISCHARGE ⁽¹⁾
Yes
MAXIMUM OUTPUT
CURRENT
2A
ENABLE
Active high
(1) This feature discharges the output of the switch to ground through a 1250-Ω resistor, preventing the output from floating. See the Output
Pulldown section in Application Information.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated