TPS22810_17 Datasheet, PDF (1/35 Pages) Texas Instruments – 2.7-18-V, On-Resistance Load Switch With Thermal Protection

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TPS22810
SLVSDH0B – DECEMBER 2016 – REVISED MAY 2017
TPS22810, 2.7-18-V, 79-mΩ On-Resistance Load Switch With Thermal Protection
1 Features
•1 Integrated Single Channel Load Switch
• Ambient Operating Temperature:
–40°C to +105°C
– SOT23-6 (DBV): 2-A Maximum Continuous
Current ¹
– WSON (DRV): 3-A Maximum Continuous
Current ¹
• Input Voltage Range: 2.7 V to 18 V
• Absolute Maximum Input Voltage: 20 V
• On-Resistance (R_ON)
– R_ON = 79 mΩ (typical) at V_IN = 12 V
• Quiescent Current
– 62 µA (typical) at V_IN = 12 V
• Shutdown Current
– 500 nA (typical) at V_IN = 12 V
• Thermal Shutdown
• Undervoltage Lock-Out (UVLO)
• Adjustable Quick Output Discharge (QOD)
• Configurable Rise Time With CT Pin
• SOT23-6 Package
– 2.9-mm × 2.8-mm, 0.95-mm Pitch,
1.45-mm Height (DBV)
• WSON Package
– 2-mm × 2-mm, 0.65-mm Pitch,
0.75-mm Height (DRV)
• ESD Performance Tested per JESD 22
– ±2-kV HBM and ±1-kV CDM
(1) _{Thermal performance must be considered}
2 Applications
• HD TV
• Industrial Systems
• Set Top Box
• Surveillance systems
3 Description
The TPS22810 is a single channel load switch with
configurable rise time and with an integrated quick
output discharge (QOD). In addition, the device
features thermal shutdown to protect the device
against high junction temperature. Because of this,
safe operating area of the device is inherently
ensured. The device contains an N-channel MOSFET
that can operate over an input voltage range of 2.7 V
to 18 V. SOT23-5 (DBV) package can support a
maximum current of 2 A. WSON (DRV) package can
support a maximum current of 3 A. The switch is
controlled by an on and off input, which is capable of
interfacing directly with low-voltage control signals.
The configurable rise time of the device greatly
reduces inrush current caused by large bulk load
capacitances, thereby reducing or eliminating power
supply droop. Undervoltage lock-out is used to turn
off the device if the VIN voltage drops below a
threshold value, ensuring that the downstream
circuitry is not damaged by being supplied by a
voltage lower than intended. The configurable QOD
pin controls the fall time of the device to allow design
flexibility for power down.
The TPS22810 is available in a leaded, SOT-23
package (DBV) which allows to visually inspect solder
joints, as well as a WSON package (DRV). The
device is characterized for operation over the free-air
temperature range of –40˚C to +105˚C.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS22810
SOT-23 (6)
WSON (6)
2.90 mm × 2.80 mm
2.00 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
Power
Supply
VIN
CIN
GND
VOUT
QOD
CL
RL
ON
EN/
CT
OFF
UVLO
TPS22810
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.