TPD4E1U06_14 Datasheet, PDF (1/15 Pages) Texas Instruments – Quad Channel High Speed ESD Protection Device

TPD4E1U06
www.ti.com
SLVSBQ9B – DECEMBER 2012 – REVISED FEBRUARY 2013
Quad Channel High Speed ESD Protection Device
Check for Samples: TPD4E1U06
FEATURES
1
• Provides System Level ESD Protection for
Low-Voltage IO Interface
• IEC 61000-4-2 Level 4
– ±15kV (Contact discharge)
– ±15kV (Air-gap discharge)
• IO Capacitance 0.8pF (Typ)
• DC Breakdown Voltage 6.5V (Min)
• Ultra low Leakage Current 10nA (Max)
• Low ESD Clamping Voltage
• Industrial Temperature Range: –40°C to 125°C
• Small, Easy-to-Route DCK, DBV, and DGS
Package
APPLICATIONS
• USB2.0
• Ethernet
• HDMI Control Lines
• MIPI Bus
• LVDS
• SATA
D1+ 1
GND 2
6 D1-
D1+ 1
GND 2
5 NC
6 D1-
5 NC
D2+ 3
4 D2-
DCK
2 mm x 2.1 mm x 0.95 mm
(0.65-mm pitch)
D2+ 3
4 D2-
DBV
2.9 mm x 2.8 x 1.45 mm
(0.95-mm pitch)
1
10
2
3
4
5
PREVIEW
9
8
7
6
DGS
3 mm x 4.9 mm x 1.1mm
(0.5-mm pitch)
DESCRIPTION
The TPD4E1U06 is a quad channel ultra low cap ESD protection device. It offers ±15KV IEC air-gap and ±15KV
contact ESD protection. Its 0.8pF line capacitance makes it suitable for a wide range of applications. Typical
application areas are HDMI, USB2.0, MHL, and DisplayPort.
T_A
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
ORDERING INFORMATION
PACKAGE ^{(1) (2)}
ORDERABLE PART NUMBER
3000
Tape and reel
TPD4E1U06DCKR
3000
Tape and reel
TPD4E1U06DBVR
3000
Tape and reel
TPD4E1U06DGSR
TOP-SIDE MARKING
BPI
NG4I
TBD
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012–2013, Texas Instruments Incorporated