TPD1E10B06_15 Datasheet, PDF (1/18 Pages) Texas Instruments – Single-Channel ESD Protection Diode in 0402 Package

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPD1E10B06
SLLSEB1D – FEBRUARY 2012 – REVISED NOVEMBER 2015
TPD1E10B06 Single-Channel ESD Protection Diode in 0402 Package
1 Features
•1 Provides System-Level ESD Protection for Low-
Voltage I/O Interface
• IEC 61000-4-2 Level 4 ESD Protection
– ±30 kV Contact Discharge
– ±30 kV Air-Gap Discharge
• IEC 61000-4-5 Surge: 6 A (8/20 µs)
• I/O Capacitance 12 pF (Typical)
• R_DYN 0.4 Ω (Typical)
• DC Breakdown Voltage ±6 V (Minimum)
• Ultralow Leakage Current 100 nA (Maximum)
• 10-V Clamping Voltage (Max at I_PP = 1 A)
• Industrial Temperature Range: –40°C to 125°C
• Space-Saving 0402 Footprint
(1 mm × 0.6 mm × 0.5 mm)
2 Applications
• End Equipment:
– Tablets
– Remote Controllers
– Wearables
– Set-Top Boxes
– Electronic Point of Sale (EPOS)
– ebooks
• Interfaces:
– Audio Lines
– Pushbuttons
– General-Purpose Input/Output (GPIO)
3 Description
The TPD1E10B06 device is a single-channel
electrostatic discharge (ESD) transient voltage
suppression (TVS) diode in a small 0402 package.
This TVS protection product offers ±30-kV contact
ESD, ±30-kV IEC air-gap protection, and has an ESD
clamp circuit with a back-to-back TVS diode for
bipolar or bidirectional signal support. The 12-pF line
capacitance of this ESD protection diode is suitable
for a wide range of applications supporting data rates
up to 400 Mbps. The 0402 package is an industry
standard and is convenient for component placement
in space-saving applications.
Typical applications of this ESD protection product
are circuit protection for audio lines (microphone,
earphone, and speakerphone), SD interfacing,
keypad or other buttons, VBUS pin and ID pin of USB
ports, and general-purpose I/O ports. This ESD clamp
is good for the protection of the end equipment like
ebooks, tablets, remote controllers, wearables, set-
top boxes, and electronic point of sale equipment.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPD1E10B06
X1SON (2)
0.60 mm × 1.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Application Schematic
IO Line 1
IO Line 2
Connector
(Source of ESD)
1
1
ESD Sensitive Device
2
2
GND Line
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.