TPA3113D2_17 Datasheet, PDF (1/36 Pages) Texas Instruments – 6-W Filter-Free Stereo Class-D Audio Power Amplifier With SpeakerGuard

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPA3113D2
SLOS650F – AUGUST 2009 – REVISED JUNE 2016
TPA3113D2 6-W Filter-Free Stereo Class-D Audio Power Amplifier With SpeakerGuard™
1 Features
•1 6-W/ch into an 8-Ω Loads at 10% THD+N From a
10-V Supply
• 12-W into a 4-Ω Mono Load at 10% THD+N From
a 10-V Supply
• 87% Efficient Class-D Operation Eliminates Need
for Heat Sinks
• Wide Supply Voltage Range Allows Operation
from 8 V to 26 V
• Filter-Free Operation
• SpeakerGuard™ Speaker Protection Includes
Adjustable Power Limiter Plus DC Protection
• Flow-Through Pinout Facilitates Easy Board
Layout
• Robust Pin-to-Pin Short-Circuit Protection and
Thermal Protection With Auto Recovery Option
• Excellent THD+N and Pop-Free Performance
• Four Selectable, Fixed Gain Settings
• Differential Inputs
2 Applications
• Televisions
• Consumer Audio Equipment
• Monitors
3 Description
The TPA3113D2 is a 6-W (per channel) efficient,
Class-D audio power amplifier for driving bridged-tied
stereo speakers. Advanced EMI Suppression
Technology enables the use of inexpensive ferrite
bead filters at the outputs while meeting EMC
requirements. SpeakerGuard™ speaker protection
circuitry includes an adjustable power limiter and a
DC detection circuit. The adjustable power limiter
allows the user to set a virtual voltage rail lower than
the chip supply to limit the amount of current through
the speaker. The DC detect circuit measures the
frequency and amplitude of the PWM signal and
shuts off the output stage if the input capacitors are
damaged or shorts exist on the inputs.
The TPA3113D2 can drive stereo speakers as low as
4 Ω. The high efficiency of the TPA3113D2, 87%,
eliminates the need for an external heat sink when
playing music.
The outputs are also fully protected against shorts to
GND, VCC, and output-to-output. The short-circuit
protection and thermal protection includes an auto-
recovery feature.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPA3113D2
TSSOP (28)
9.70 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
TPA3113D2 Simplified Application Schematic
1mF
OUTL+
LINP TPA3113D2
Audio
Source
OUTL-
OUTR+
OUTR-
LINN
RINP
RINN
OUTPL
FERRITE
BEAD
6W
OUTNL
FILTER
8W
GAIN0
GAIN1
PLIMIT
PBTL
OUTPR
FERRITE
BEAD
6W
OUTNR
FILTER
8W
Fault
SD
PVCC
8 to 26V
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.