TMP320C31KGDB Datasheet, PDF (1/9 Pages) Texas Instruments – FLOATING-POINT DIGITAL SIGNAL PROCESSOR KNOWN GOOD DIES

TMP320C31KGDB, SMJ320C31KGDB, SMJ320LC31KGDB
FLOATINGĆPOINT DIGITAL SIGNAL PROCESSOR
KNOWN GOOD DIES
SGUS023B − APRIL 1997 − REVISED OCTOBER 2001
D Commercial Operating Free-Air
Temperature Range
−0°C to 70°C
D Military Operating Free-Air
Temperature Range
−55°C to 125°C, QML Processing
D Fast Instruction Cycle Time of 50 ns
D Two 1K × 32-Bit Single-Cycle Dual-Access
On-Chip RAM Blocks
D 32-Bit Instruction and Data Words,
24-Bit Addresses
D Integer, Floating-Point, and Logical
Operations
D 40- or 32-Bit Floating-Point / Integer
Multiplier and Arithmetic Logic Unit (ALU)
D 24 × 24-Bit Integer Multiplier, 32-Bit Product
D 32 × 32-Bit Floating-Point Multiplier,
40-Bit Product
D Parallel ALU and Multiplier Execution in a
Single Cycle
D 32-Bit Barrel Shifter
D Eight Extended-Precision Registers
(Accumulators)
D Circular and Bit-Reversed Addressing
Capabilities
D One Independent Bidirectional Serial Port
With Support for 8 -, 16-, 24 -, or 32-Bit
Transfers
D Two 32-Bit Timers With Control and
Counter Registers
D Validated Ada Compiler
D 64-Word × 32-Bit Instruction Cache
D On-Chip Direct Memory Access (DMA)
Controller for Concurrent I / O and CPU
Operation
D Flexible Boot Program Loader for the
’320C31KGDB Instead of the ROM
D One 32-Bit External Port for the
’320C31KGDB (24-Bit Address)
D Two Address Generators With Eight
Auxiliary Registers and Two Auxiliary
Register Arithmetic Units (ARAUs)
D Zero-Overhead Loops With Single-Cycle
Branches
D Interlocked Instructions for
Multiprocessing Support
D Two- and Three-Operand Instructions
D Conditional Calls and Returns
D Block Repeat Capability
D Fabricated Using Enhanced Performance
Implanted CMOS (EPIC) Technology by
Texas Instruments
description
The TMP/SMJ320C31KGDB and SMJ320LC31KGDB digital signal processors (DSPs) known good dies
(KGDs) are high-performance, 32-bit floating-point processors manufactured in 0.72-µm, double-level metal
CMOS technology.
The TMP/SMJ320C31KGDB and SMJ320LC31KGDB internal busing and special digital signal processing
instruction set have the speed and flexibility to execute up to 40 million floating-point operations per second
(MFLOPS). The devices optimize speed by implementing functions in hardware that other processors
implement through software or microcode. This hardware-intensive approach provides performance previously
unavailable on a single chip.
The devices can perform parallel multiply and ALU operations on integer or floating-point data in a single cycle.
Each processor also possesses a general-purpose register file, a program cache, dedicated ARAUs, internal
dual-access memories, one DMA channel supporting concurrent I / O, and a short machine-cycle time. High
performance and ease of use are results of these features.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2001, Texas Instruments Incorporated
On products compliant to MILĆPRFĆ38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
1