TMP303_16 Datasheet, PDF (1/24 Pages) Texas Instruments – Temperature Range Monitor In Micropackage

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TMP303
SBOS486F – JULY 2009 – REVISED FEBRUARY 2016
TMP303 Easy-To-Use, Low-Power, 1°C, Low-Supply
Temperature Range Monitor In Micropackage
1 Features
•1 Low Power: 5 μA (Maximum)
• SOT-563 Package: 1.60 × 1.60 × 0.6 mm
• Trip Point Accuracy:
– ±0.2°C (Typical) from –40°C to 125°C
• Push-Pull Output
• Selectable Hysteresis: 1/2/5/10°C
• Supply Voltage Range: 1.4 V to 3.6 V
2 Applications
• Battery Charging
• Consumer Electronics
• Enterprise
• Telecom
3 Description
The TMP303 devices are temperature range monitors
that offer design flexibility through an extra small
footprint (SOT-563), low power (5 μA maximum) and
low supply voltage capability (as low as 1.4 V).
These devices require no additional components for
operation; each can function independent of
microprocessors or microcontrollers.
There are four trip points available see Device
Options. Trip points can be programmed at the
factory to any desired temperature. For applications
that require different values, contact your local TI
representative.
The OUT pin is a push-pull, active-high output. When
the measured temperature is beyond the trip point
range, and the Set Output High (SOH) pin is low, the
OUT pin is high. The SOH pin is an input pin with an
internal pulldown resistor. When the SOH pin is
forced high, the OUT pin goes high regardless of the
measured temperature.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TMP303
SOT-563 (6)
1.60 mm × 1.20 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
TMP303 Functional Block Diagram
1.4V to 3.6V
V_S
HYST_SET0
HYST_SET1
Temperature
Sensor
DS
ADC
Hysteresis
Logic
Trip Point
Logic
GND
OUT
100kW
SOH
Trip Threshold Accuracy
40
35
30
25
20
15
10
5
0
Temperature Accuracy (qC)
D003
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.