TLV9061 Datasheet, PDF (1/22 Pages) Texas Instruments – 10-MHz, RRIO, CMOS Operational Amplifier for Cost-Sensitive Systems

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TLV9061, TLV9062, TLV9064
SBOS839 – MARCH 2017
TLV906x 10-MHz, RRIO, CMOS Operational Amplifier for Cost-Sensitive Systems
1 Features
•1 Rail-to-Rail Input and Output
• Low Input Offset Voltage: ±0.3 mV
• Unity-Gain Bandwidth: 10 MHz
• Low Broadband Noise: 11 nV/√Hz
• Low Input Bias Current: 20 pA
• Low Quiescent Current: 575 µA
• Unity-Gain Stable
• Internal RFI and EMI Filter
• Operational at Supply Voltages as Low as 1.8 V
• Easier to Stabilize with Higher Cap Load Due to
Resistive Open Loop Output Impedance
• Extended Temperature Range: –40°C to +125°C
2 Applications
• E-Bikes
• Smoke Detectors
• HVAC: Heating, Ventilating, and Air Conditioning
• Motor Control: AC Induction
• Refrigerators
• Wearable Devices
• Laptop Computers
• Washing Machines
• Sensor Signal Conditioning
• Power Modules
• Barcode Scanners
• Active Filters
• Low-Side Current Sensing
3 Description
The TLV9061 (single-), TLV9062 (dual-), and
TLV9064 (quad-) are single, dual and quad low
voltage (1.8 V to 5.5 V) operational amplifiers with
rail-to-rail input and output swing capabilities. These
devices are the most cost-effective solutions for
applications where low voltage operation, space
saving and high cap load drive are needed. Although
the cap load drive of the TLV906x is 100 pF, the
resistive open loop output impedance makes it easy
to stabilize with much higher capacitive loads. These
amplifiers are designed specifically for low voltage
operation (1.8 V to 5.5 V) with performance
specifications similar to the OPAx316 and TLVx316
devices.
The robust design of the TLV906x series provides
ease-of-use to the circuit designer: unity-gain stable,
integrated RFI and EMI rejection filter and no phase
reversal in overdrive condition.
Micro-size packages such as SOT553 and WSON
are offered for all the channel variants (single, dual
and quad) along with industry standard packages
such as SOIC, MSOP, SOT-23 and TSSOP
packages.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOT-23 (5)
1.60 mm × 2.90 mm
TLV9061
SC70 (5)
SOT553 (5)
1.25 mm × 2.00 mm
1.65 mm x 1.20 mm
SOIC (8)
3.91 mm × 4.90 mm
SOIC (8)
3.91 mm × 4.90 mm
TLV9062
WSON (8)
2.00 mm x 2.00 mm
VSSOP (8)
3.00 mm × 3.00 mm
TLV9064
SOIC(14)
TSSOP (14)
8.65 mm × 3.91 mm
4.40 mm × 5.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Single-Pole, Low-Pass Filter
R_G
R_F
R₁
V_IN
C₁
( ( ^VOUT
V_IN
=
1
+
R_F
R_G
1
1 + sR₁C₁
V_OUT
f_{-3 dB} =
1
2pR₁C₁
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for pre-production products; subject to
change without notice.