TLV810M_13 Datasheet, PDF (1/14 Pages) Texas Instruments – 3-Pin Voltage Supervisors with Active-High, Push-Pull Reset

TLV810M, TLV810R
TLV810S, TLV810Z
www.ti.com
SBVS158A – APRIL 2011 – REVISED JUNE 2011
3-Pin Voltage Supervisors
with Active-High, Push-Pull Reset
Check for Samples: TLV810M, TLV810R, TLV810S, TLV810Z
FEATURES
1
•2 3-Pin SOT23 Package
• Supply Current: 9 µA (Typical)
• Precision Supply Voltage Monitor:
2.5 V, 3 V, 3.3 V, 5 V
• Power-On Reset Generator with
Fixed Delay Time of 200 ms
• Pin-for-Pin Compatible with MAX810
• Temperature Range: –40°C to +125°C
• Push-Pull, RESET Output
APPLICATIONS
• DSPs, Microcontrollers, and Microprocessors
• Wireless Communication Systems
• Portable/Battery-Powered Equipment
• Programmable Controls
• Intelligent Instruments
• Industrial Equipment
• Notebook and Desktop Computers
• Automotive Systems
DEVICE FAMILY COMPARISON
DEVICE
FUNCTION
TLV803
Open-Drain, RESET Output
TLV809
Push-Pull, RESET Output
TLV810
Push-Pull, RESET Output
GND
TLV810
DBZ Package
(Top View)
1
3
V_DD
DESCRIPTION
The TLV810 family of supervisory circuits provides
circuit initialization and timing supervision, primarily
for DSPs and processor-based systems.
During power-on, RESET is asserted when the
supply voltage (V_DD) becomes higher than 1.1 V.
Thereafter, the supervisory circuit monitors V_DD and
keeps RESET active as long as V_DD remains below
the threshold voltage V_IT. An internal timer delays the
return of the output to the inactive state (low) to
ensure proper system reset. The delay time (t_d(typ) =
200 ms) starts after V_DD has risen above the
threshold voltage, V_IT. When the supply voltage drops
below the V_IT threshold voltage, the output becomes
active (high) again. No external components are
required. All the devices in this family have a fixed
sense-threshold voltage (V_IT) set by an internal
voltage divider.
The product spectrum is designed for supply voltages
of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are
available in a 3-pin SOT-23 package. The TLV810
devices are characterized for operation over a
temperature range of –40°C to +125°C.
TYPICAL APPLICATION
3.3-V LDO
5V
IN
3.3 V
OUT
GND
V_DD
V_DD
TLV810S
RESET
GND
DSP/FPGA/ASIC
RESET
GND
RESET
2
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated