English
Language : 

TLV62085_16 Datasheet, PDF (1/22 Pages) Texas Instruments – High Efficiency 3-A Step-Down Converter in 2-mm × 2-mm VSON Package
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TLV62085
SLVSD63 – OCTOBER 2015
TLV62085 High Efficiency 3-A Step-Down Converter in 2-mm × 2-mm VSON Package
1 Features
•1 DCS-Control™ Topology
• Up to 95% Efficiency
• 17-μA Operating Quiescent Current
• 31mΩ and 23mΩ Power MOSFET Switch
• 2.5-V to 6.0-V Input Voltage Range
• 0.8-V to VIN Adjustable Output Voltage
• Power Save Mode for Light Load Efficiency
• 100% Duty Cycle for Lowest Dropout
• Hiccup Short-Circuit Protection
• Output Discharge
• Power Good Output
• Thermal Shutdown Protection
• Available in 2-mm × 2-mm VSON Package
• For Improved Feature Set, See TPS62085
2 Applications
• Battery-Powered Applications
• Point-of-Load
• Processor Supplies
• Hard Disk Drives (HDD) / Solid State Drives
(SSD)
3 Description
The TLV62085 device is a high-frequency
synchronous step-down converter optimized for small
solution size and high efficiency. With an input
voltage range of 2.5 V to 6.0 V, common battery
technologies are supported. The devices focus on
high-efficiency step-down conversion over a wide
output current range. At medium to heavy loads, the
converter operates in PWM mode and automatically
enters Power Save Mode operation at light load to
maintain high efficiency over the entire load current
range.
To address the requirements of system power rails,
the internal compensation circuit allows a large
selection of external output capacitor values ranging
from 10 µF to 150 µF and above. Together with its
DCS-Control architecture, excellent load transient
performance and output voltage regulation accuracy
are achieved. The device is available in a 2-mm × 2-
mm VSON package.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TLV62085
VSON (7)
2.00 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Typical Application Schematic
VIN
2.5V to 6V C1
10µF
TLV62085
VIN
SW
EN
VOS
FB
GND
PG
L1
0.47µH
R1
138k
R3
1M
C2
22µF
VOUT
1.8V
R2
110k
POWER GOOD
Efficiency at VIN = 5 V
100
90
80
70
60
1m
10m
100m
Load (A)
VOUT = 1.2 V
VOUT = 1.8 V
VOUT = 3.3 V
1
5
D008
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.