TLV369 Datasheet, PDF (1/27 Pages) Texas Instruments – Cost-Optimized, 800-nA, 1.8-V, Rail-to-Rail I/O Operational Amplifier with Zero-Crossover Distortion

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TLVx369 Cost-Optimized, 800-nA, 1.8-V, Rail-to-Rail I/O
Operational Amplifier with Zero-Crossover Distortion
TLV369, TLV2369
SBOS757 – MAY 2016
1 Features
•1 Cost-Optimized Precision Amplifier nanoPower:
800 nA/Ch (Typ)
• Low Offset Voltage: 400 µV (Typ)
• Rail-to-Rail Input and Output
• Zero-Crossover Distortion
• Low Offset Drift: 0.5 µV/°C (Typ)
• Gain-Bandwidth Product: 12 kHz
• Supply Voltage: 1.8 V to 5.5 V
• microSize Packages: SC70-5, VSSOP-8
2 Applications
• Blood Glucose Meters
• Test Equipment
• Low-Power Sensor Signal Conditioning
• Portable Devices
3 Description
The TLV369 family of single and dual operational
amplifiers represents a cost-optimized generation of
1.8-V nanopower amplifiers.
With the zero-crossover distortion circuitry, these
amplifiers feature high linearity over the full common-
mode input range with no crossover distortion,
enabling true rail-to-rail input and operating from a
1.8-V to 5.5-V single supply. The family is also
compatible with industry-standard nominal voltages of
3.0 V, 3.3 V, and 5.0 V.
The TLV369 (single version) is offered in a 5-pin
SC70 package. The TLV2369 (dual version) comes in
8-pin VSSOP and SOIC packages.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TLV369
SC70 (5)
2.00 mm × 1.25 mm
TLV2369
VSSOP (8)
SOIC (8)
3.00 mm × 3.00 mm
4.90 mm × 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
TLV369 Family Eliminates Crossover Distortion
Across the Full Supply Range
100
80
60
40
20
0
–20
–40
–60
–80
–100
10 Typical Units Shown
V_S = 5 V
Common-Mode Voltage (V)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.