TLV2760_16 Datasheet, PDF (1/46 Pages) Texas Instruments – FAMILY OF1.8V MICROPOWER RAIL-TO-RAIL OUTPUT

TLV2760, TLV2761, TLV2762, TLV2763, TLV2764, TLV2765
FAMILY OF 1.8 V MICROPOWER RAIL-TO-RAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS WITH SHUTDOWN
SLOS326F − JUNE 2000 − REVISED AUGUST 2013
D Low Supply Voltage . . . 1.8 V to 3.6 V
D Very Low Supply Current . . . 20 μA (per
channel)
D Ultralow Power Shut-Down Mode
− I_DD(SHDN) = 10 nA/Channel
D CMOS Rail-to-Rail Input/Output
D Input Common-Mode Voltage
Range . . . −0.2 V to V_DD + 0.2 V
D Input Offset Voltage . . . 550 μV
D Wide Bandwidth . . . 500 kHz
D Slew Rate . . . 0.20 V/μs
D Specified Temperature Range:
0°C to 70°C . . . Commercial Grade
−40°C to 85°C . . . Industrial Grade
D Ultrasmall Packaging
5 or 6 Pin SOT-23 (TLV2760/1)
8 or 10 Pin MSOP (TLV2762/3)
D Universal Op-Amp EVM
description
Operational Amplifier
−
+
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
20
A_V= 1
18 V_IC = V_DD/2
16 ^{TA = 25° C}
14
12
10
8
6
4
2
0
0 0.6 1.2 1.8 2.4 3 3.6
V_DD − Supply Voltage − V
The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 μA while operating
down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which
allows the devices to be operated from ("1.8 V supplies down to "0.9 V) two AA or AAA cells. The devices
have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH
cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.
The low supply current is coupled with extremely low input bias currents enabling them to be used with
mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency
measurement applications desiring long active battery life.
All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP,
and quads in the TSSOP package.
DEVICE
TLV224x
TLV2211
TLV276x
TLV245x(A)
TLV246x(A)
TLV278x(A)
V_DD
(V)
2.5 − 12
2.7 − 10
1.8 − 3.6
2.7 − 6
2.7 − 6
1.8 − 3.6
SELECTION OF SINGLE SUPPLY AMPLIFIER PRODUCTS
V_IO I_DD/Ch
I_IB
GBW
(μV)
(μA)
(pA) (MHz)
SR
(V/μs)
Vn,1kHz
(nV/√Hz)
600
1
100 0.0055 0.002
NA
450
13
1
0.065
0.025
21
550
20
3
0.5
0.23
95
20
23
500
0.22
0.11
49
150
550 1300
6.4
1.6
11
250
650
2.5
8
5
18
I_O
(mA)
0.2
0.4
5
2.5
25
10
SHUT-
DOWN
—
—
Y
Y
Y
Y
RAIL-TO-
RAIL
I/O
O
I/O
I/O
I/O
I/O
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000−2013, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1