TLV2422-Q1 Datasheet, PDF (1/28 Pages) Texas Instruments – Advanced LinCMOS™ RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS

TLV2422ĆQ1, TLV2422AĆQ1
Advanced LinCMOS RAILĆTOĆRAIL OUTPUT
WIDEĆINPUTĆVOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SGLS175A − AUGUST 2003 − REVISED APRIL 2008
D Qualified for Automotive Applications
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Output Swing Includes Both Supply Rails
D Extended Common-Mode Input Voltage
Range . . . 0 V to 4.5 V (Min) With 5-V Single
Supply
D No Phase Inversion
D Low Noise . . . 18 nV/√Hz Typ at f = 1 kHz
D Low Input Offset Voltage
950 µV Max at T_A = 25°C (TLV2422A)
D Low Input Bias Current . . . 1 pA Typ
D Micropower Operation . . . 50 µA Per
Channel
D 600-Ω Output Drive
D PACKAGE
(TOP VIEW)
1OUT 1
1IN − 2
1IN + 3
V_{DD −}/GND 4
8 V_{DD +}
7 2OUT
6 2IN −
5 2IN +
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
5
VDD = 5 V
4
TA = −40°C
TA = 25°C
description
3
The TLV2422 and TLV2422A are dual low-voltage
operational amplifiers from Texas Instruments.
The common-mode input voltage range for this
2
TA = 85°C
device has been extended over the typical CMOS
amplifiers making them suitable for a wide range
of applications. In addition, the devices do not
phase invert when the common-mode input is
1
TA = 125°C
driven to the supply rails. This satisfies most
design requirements without paying a premium
0
0 4 8 12 16 20 24 28 32 36 40
for rail-to-rail input performance. They also exhibit
rail-to-rail output performance for increased
dynamic range in single- or split-supply
IOH − High-Level Output Current − mA
Figure 1
applications. This family is fully characterized at
3-V and 5-V supplies and is optimized for low-voltage operation. The TLV2422 only requires 50 µA of supply
current per channel, making it ideal for battery-powered applications. The TLV2422 also has increased output
drive over previous rail-to-rail operational amplifiers and can drive 600-Ω loads for telecom applications.
Other members in the TLV2422 family are the high-power, TLV2442, and low-power, TLV2432, versions.
The TLV2422, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for
high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and
low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In
addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when
interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV2422A is available with
a maximum input offset voltage of 950 µV.
If the design requires single operational amplifiers, see the TI TLV2211/21/31. This is a family of rail-to-rail output
operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal
for high density, battery-powered equipment.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Advanced LinCMOS is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2008, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1