|
TLV07 Datasheet, PDF (1/21 Pages) Texas Instruments – 36-V Precision, Rail-to-Rail Output Operational Amplifier | |||
|
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TLV07
SBOS832 â JULY 2017
TLV07 36-V Precision, Rail-to-Rail Output Operational Amplifier
1 Features
â¢1 Low Offset Voltage: 100 µV (Maximum)
⢠Rail-to-Rail Output
⢠Low Noise: 19 nV / âHz
⢠Unity-Gain Stable
⢠RFI Filtered Inputs
⢠Input Range Includes Negative Supply
⢠Rail-to-Rail Output
⢠Gain Bandwidth: 1 MHz
⢠Low Quiescent Current: 950 µA per Amplifier
⢠Full Industrial Temperature Range:
â40°C to +125°C
⢠Offered in the Industry-Standard 8-Pin SOIC
Package
â¢
2 Applications
⢠Battery Testers
⢠Tracking Amplifier in Power Modules
⢠Merchant Power Supplies
⢠Transducer Amplifiers
⢠e-Bikes
⢠Temperature Measurements
⢠Strain Gauge Amplifiers
⢠Precision Integrators
⢠Battery-Powered Instruments
⢠Test Equipment
3 Description
The TLV07 is a 36-V, single-supply, low-noise,
precision operational amplifier (op amp)
manufactured using TIâs e-trim⢠operational amplifier
technology. The e-trim technology is a TI proprietary
method of trimming internal device parameters during
either wafer probing or final testing. Each amplifiers'
input offset voltage is trimmed in production to obtain
a low offset voltage of 100 µV (maximum).
The TLV07 offers outstanding dc precision and ac
performance, including rail-to-rail output, low offset
voltage (±100 µV, maximum) and 1-MHz bandwidth.
The TLV07 is stable at G = 1 with capacitive loads up
to 200 pF. The input can operate 100 mV below the
negative rail and within 2 V of the positive rail. This
wide input voltage range, combined with a high
CMRR of 120 dB, make the TLV07 well-suited when
operated in the non-inverting configuration.
The TLV07 op amp is specified from â40°C to
+125°C.
PART NUMBER
TLV07
Device Information(1)
PACKAGE
BODY SIZE (NOM)
SOIC (8)
4.90 mm à 3.91 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Single Pole Low-Pass Filter With Gain
RG
RF
R1
VIN
C1
( ( VOUT
VIN
=
1
+
RF
RG
1
1 + sR1C1
VOUT
f-3 dB =
1
2pR1C1
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for pre-production products; subject to
change without notice.
|
▷ |