TLC59213_15 Datasheet, PDF (1/19 Pages) Texas Instruments – 8-Bit Parallel In and Out Darlington Source Driver

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TLC59213, TLC59213A
SLVS867B – MAY 2009 – REVISED AUGUST 2015
TLC59213x 8-Bit Parallel In and Out Darlington Source Driver With Latch
1 Features
•1 Output Current on Each Channel
(I_OUT Max = –500 mA)
• V_CE(sus) = 13.2 V
• Input Compatible With TTL/5-V CMOS
• Clear (CLR) and Clock (CLK) TTL/CMOS Control
Inputs
• CLR Control Input to Off the Output
• Darlington Source Driver
• Clock Input Up to 1 MHz
• Enhanced Hold Time (t_h) on TLC59213A
• Temperature Range: –40°C to 85°C
2 Applications
• Lamp and Display (LED)
• Hammer
• Relay
3 Description
The TLC59213 and TLC59213A are 8-bit source
drivers with input latch with CLK input and CLR to set
the output OFF. The TLC59213 and TLC59213A
have large output source currents up to 500 mA with
Darlington transistor and collectors tied to V_CC. These
feature make the device optimum level of driving the
matrix of ink jet printer head, LEDs, and the scan-side
of resistor's matrix. The TLC59213 and TLC59213A
differ only in the Data Hold Time Specification (t_h).
The clamp diode is between output and ground for
switching inductive load.
All inputs are TTL/CMOS, which enable to any logic-
level inputs such as MCU, CPU or SN74LV594 (serial
to parallel) and the output enable LED matrix display.
It can also be used with another device sink driver
such as TLC59210, TLC59211 and TLC59212.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TLC59213
TLC59213A
PDIP (20)
TSSOP (20)
24.33 mm × 6.35 mm
6.50 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Diagram÷
TLC59213
MCU
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.