TLC372CDRG4 Datasheet, PDF (1/26 Pages) Texas Instruments – Single or Dual-Supply Operation

TLC372
LinCMOS DUAL DIFFERENTIAL COMPARATORS
D Single or Dual-Supply Operation
D Wide Range of Supply Voltages 2 V to 18 V
D Low Supply Current Drain
150 µA Typ at 5 V
D Fast Response Time . . . 200 ns Typ for
TTL-Level Input Step
D Built-in ESD Protection
D High Input Impedance . . . 10¹² Ω Typ
D Extremely Low Input Bias Current
5 pA Typ
D Ultrastable Low Input Offset Voltage
D Input Offset Voltage Change at Worst-Case
Input Conditions Typically 0.23 µV/Month,
Including the First 30 Days
D Common-Mode Input Voltage Range
Includes Ground
D Output Compatible With TTL, MOS, and
CMOS
D Pin-Compatible With LM393
SLCS114E − NOVEMBER 1983 − REVISED JULY 2008
TLC372C, TLC372I, TLC372M, TLC372Q
D, P, OR PW PACKAGE
TLC372M . . . JG PACKAGE
(TOP VIEW)
1OUT 1
1IN − 2
1IN + 3
GND 4
8 V_CC
7 2OUT
6 2IN −
5 2IN +
TLC372M . . . FK PACKAGE
(TOP VIEW)
NC
1IN −
NC
1IN +
NC
3 2 1 20 19
4
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
2OUT
NC
2IN −
NC
description
This device is fabricated using LinCMOS
technology and consists of two independent
voltage comparators, each designed to operate
from a single power supply. Operation from dual
supplies is also possible if the difference between
the two supplies is 2 V to 18 V. Each device
features extremely high input impedance
(typically greater than 10¹² Ω), allowing direct
interfacing with high-impedance sources. The
outputs are n-channel open-drain configurations
and can be connected to achieve positive-logic
wired-AND relationships.
NC − No internal connection
TLC372M
U PACKAGE
(TOP VIEW)
NC 1
1OUT 2
1IN− 3
1IN+ 4
GND 5
10 NC
9 V_CC
8 2OUT
7 2IN−
6 2IN+
The TLC372 has internal electrostatic discharge
(ESD) protection circuits and has been classified
symbol (each comparator)
with a 1000-V ESD rating using human body
model testing. However, care should be exercised
IN +
in handling this device as exposure to ESD may
result in a degradation of the device parametric
OUT
performance.
IN −
The TLC372C is characterized for operation from 0°C to 70°C. The TLC372I is characterized for operation from
−40°C to 85°C. The TLC372M is characterized for operation over the full military temperature range of −55°C
to 125°C. The TLC372Q is characterized for operation from − 40°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinCMOS is a trademark of Texas Instruments Incorporated. All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1983−2008, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1