TLC352_16 Datasheet, PDF (1/18 Pages) Texas Instruments – LinCMOSE DUAL DIFFERENTIAL COMPARATOR

TLC352
LinCMOS DUAL DIFFERENTIAL COMPARATOR
D Single- or Dual-Supply Operation
D Wide Range of Supply Voltages
1.5 V to 18 V
D Very Low Supply Current Drain
150 µA Typ at 5 V
65 µA Typ at 1.4 V
D Built-In ESD Protection
D High Input Impedance . . . 10¹² Ω Typ
D Extremely Low Input Bias Current 5 pA Typ
D Ultrastable Low Input Offset Voltage
D Input Offset Voltage Change at Worst-Case
Input Conditions Typically 0.23 µV/ Month,
Including the First 30 Days
D Common-Mode Input Voltage Range
Includes Ground
D Outputs Compatible With TTL, MOS, and
CMOS
D Pin-Compatible With LM393
SLCS016A − SEPTEMBER 1985 − REVISED SEPTEMBER 2002
TLC352C, TLC352I . . . D OR P PACKAGE
(TOP VIEW)
1OUT 1
1IN− 2
1IN+ 3
GND 4
8 V_DD
7 2OUT
6 2IN−
5 2IN+
symbol (each comparator)
IN+
OUT
IN−
description
This device is fabricated using LinCMOS technology and consists of two independent voltage comparators,
each designed to operate from a single power supply. Operation from dual supplies is also possible if the
difference between the two supplies is 1.4 V to 18 V. Each device features extremely high input impedance
(typically greater than 10¹² Ω), which allows direct interface to high-impedance sources. The output are
n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.
The capability of the TLC352 to operate from 1.4-V supply makes this device ideal for low-voltage battery
applications.
The TLC352 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 2000-V
ESD rating tested under MIL-STD-883C, Method 3015. However, care should be exercised in handling this
device as exposure to ESD may result in degradation of the device parametric performance.
The TLC352C is characterized for operation from 0°C to 70°C. The TLC352I is characterized for operation over
the industrial temperature range of − 40°C to 85°C.
AVAILABLE OPTIONS
PACKAGE
TA
VIO max
AT 25°C
SMALL-OUTLINE
PLASTIC DIP
(D)
(P)
0°C to 70°C
5 mV
TLC352CD
TLC352CP
− 40°C to 85°C
5 mV
TLC352ID
TLC352IP
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC352 CDR).
LinCMOS is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2002, Texas Instruments Incorporated
1