English
Language : 

TIR1000PSR Datasheet, PDF (1/14 Pages) Texas Instruments – STANDALONE IrDAE ENCODER AND DECODER
TIR1000, TIR1000I
STANDALONE IrDA™ ENCODER AND DECODER
D Adds Infrared (IR) Port to Universal
Asynchronous Receiver Transmitter
(UART)
D Compatible With Infrared Data Association
(IrDA™) and Hewlett Packard Serial Infrared
(HPSIR)
D Provides 1200 bps to 115 kbps Data Rate
D Operates From 2.7 V to 5.5 V
D Provides Simple Interface With UART
D Decodes Negative or Positive Pulses
D Available in Two 8-Terminal Plastic Small
Outline Packages (PSOP), PS Package Has
Slightly Larger Dimensions Than PW
Package
SLLS228F – DECEMBER 1995 – REVISED JULY 1999
PS OR PW PACKAGE
(TOP VIEW)
16XCLK
1
U_TXD
2
U_RXD
3
GND
4
8
VCC
7
IR_TXD
6
IR_RXD
5
RESET
functional block diagram
RESET
IR_RXD
Decoder
U_RXD
description
The TIR1000 serial infrared (SIR) encoder/
decoder is a CMOS device which encodes and
decodes bit data in conformance with the IrDA
specification.
16XCLK
U_TXD
Encoder
IR_TXD
A transceiver device is needed to interface to the photo-sensitive diode (PIN) and the light emitting diode (LED).
A UART is needed to interface to the serial data lines.
Terminal Functions
TERMINAL
NAME NO.
ÁÁÁÁÁÁ 16XCLK 1
ÁÁÁÁÁÁÁÁÁÁÁÁ GND
4
IR_RXD 6
ÁÁÁÁÁÁÁÁÁÁÁÁ IR_TXD 7
ÁÁÁÁÁÁ RESET 5
ÁÁÁÁÁÁ U_RXD 3
ÁÁÁÁÁÁÁÁÁÁÁÁ U_TXD 2
ÁÁÁÁÁÁÁÁÁÁÁÁÁ VCC
8
I/O
DESCRIPTION
I Clock signal. 16XCLK should be set to 16 times the baud rate. The highest baud rate for IrDA is 115.2 kbps for which the
clock frequency equals 1.843 MHz (this terminal is tied to the BAUDOUT of a UART).
Ground
I Infrared receiver data. IR_RXD is an IrDA-SIR-modulated input from an optoelectronics transceiver whose input pulses
should be 3/16 of the baud rate period.
O Infrared transmitter data. IR_TXD is an IrDA-SIR-modulated output to an optoelectronics transceiver.
I Active high reset. RESET initializes an IrDA-SIR-decode/encode state machine (this terminal is tied to a UART reset
line).
O Receiver data. U_RXD is decoded (demodulated) data from IR_RXD according to the IrDA specification (this terminal is
tied to SIN of a UART).
I Transmitter data. U_TXD is encoded (modulated) data and output data as IR_TXD (this terminal is tied to SOUT from a
UART).
Supply voltage
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
IrDA is a registered trademark of the Infrared Data Association.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1