TAS5630B_15 Datasheet, PDF (1/38 Pages) Texas Instruments – TAS5630B 300-W Stereo and 400-W Mono PurePath™ HD Analog-Input Power Stage

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TAS5630B
SLES217D – NOVEMBER 2010 – REVISED MARCH 2015
TAS5630B 300-W Stereo and 400-W Mono PurePath™ HD Analog-Input Power Stage
1 Features
•1 PurePath™ HD Enabled Integrated Feedback
Provides:
– Signal Bandwidth up to 80 kHz for High-
Frequency Content From HD Sources
– Ultralow 0.03% THD at 1 W into 4 Ω
– Flat THD at All Frequencies for Natural Sound
– 80-dB PSRR (BTL, No Input Signal)
– > 100-dB (A-weighted) SNR
– Click- and Pop-Free Start-up
• Multiple Configurations Possible on the Same
PCB With Stuffing Options:
– Mono Parallel Bridge-Tied Load (PBTL)
– Stereo Bridge-Tied Load (BTL)
– 2.1 Single-Ended Stereo Pair and BTL
Subwoofer
– Quad Single-Ended Outputs
• Total Output Power at 10% THD+N
– 400 W in Mono PBTL Configuration
– 300 W per Channel in Stereo BTL
Configuration
– 145 W per Channel in Quad Single-Ended
Configuration
• High-Efficiency Power Stage (> 88%) With 60-mΩ
Output MOSFETs
• Two Thermally Enhanced Package Options:
– PHD (64-Pin QFP)
– DKD (44-Pin PSOP3)
• Self-Protection Design (Including Undervoltage,
Overtemperature, Clipping, and Short-Circuit
Protection) With Error Reporting
• EMI Compliant When Used With Recommended
System Design
2 Applications
• Mini Combo System
• AV Receivers
• DVD Receivers
• Active Speakers
3 Description
The TAS5630B device is a high-performance analog-
input class-D amplifier with integrated closed-loop
feedback technology (known as PurePath HD
technology) with the ability to drive up to 300 W ⁽¹⁾
stereo into 4-Ω to 8-Ω speakers from a single 50-V
supply.
PurePath HD technology enables traditional AB-
amplifier performance (< 0.03% THD) levels while
providing the power efficiency of traditional class-D
amplifiers.
Unlike traditional class-D amplifiers, the distortion
curve does not increase until the output levels move
into clipping.
PurePath HD technology enables lower idle losses,
making the device even more efficient. When coupled
with TI’s class-G power-supply reference design for
TAS563x, industry-leading levels of efficiency can be
achieved.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TAS5630B
HSSOP (44)
HTQFP (64)
15.90 mm × 11.00 mm
14.00 mm × 14.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical TAS5630B Application Block Diagram
3 ´ OPA1632
♫♪
ANALOG
AUDIO
INPUT
PurePath^TM HD
TAS5630B
(2.1 Configuration)
±15 V
12 V 25 V–50 V
♫♪
♫♪
PurePath^TM HD
Class-G Power Supply
Ref. Design
110 VAC ® 240 VAC
(1) Achievable output power levels are dependent on the thermal
configuration of the target application. A high-performance
thermal interface material between the exposed package heat
slug and the heat sink should be used to achieve high output
power levels.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.