SN75LVCP600 Datasheet, PDF (1/24 Pages) Texas Instruments – 6.0 Gbps SATA PC Board and Cable Equalizer

SN75LVCP600DRF
www.ti.com
6.0 Gbps SATA PC Board and Cable Equalizer
Check for Samples: SN75LVCP600DRF
SLLSE63 – DECEMBER 2010
FEATURES
1
• Multirate Operation, 1.5/3.0/6.0 Gbps
• Suitable to Receive 6.0 Gbps Data Over up to
40 Inches (1.0 meter) of FR4 PC Board
• Compensates up to 14dB Loss on the Receive
Side and 1.2dB Loss on the Transmit Side at 3
GHz
• Integrated Output Squelch
• Auto Low Power Feature Lowers Power by
>80% When Link is in Partial or Slumber Mode
– <100 mW (Active Mode, typ)
– <11 mW (Auto Low Power Mode, typ)
• Single 3.3 V Supply
• High Protection Against ESD Transient
– HBM: 6,000 V
– CDM: 1,500 V
• Ultra Small Footprint, 2x2 QFN Package
APPLICATIONS
• Notebooks, Desktops, Docking Stations,
Servers, Workstations
DESCRIPTION
The SN75LVCP600 is a versatile single channel, SATA signal conditioner supporting data rates up to 6.0Gbps.
The device complies with SATA physical link 2m and 3i specifications. The SN75LVCP600 operates from a
single 3.3V supply and has 100-Ω line termination with self-biasing feature, making the device suitable for AC
coupling. The inputs incorporate an out-of-band (OOB) detector, which automatically squelches the output when
input differential voltage falls below theshold while maintaining a stable common-mode voltage compliant to
SATA link. The device is also designed to handle spread spectrum clocking (SSC) transmission per SATA spec.
The SN75LVCP600 handles interconnect losses at its input with selectable equalization settings that can be
programmed to match the loss in the channel. For data rates of 3Gbps and lower the LVCP600 equalizes signals
for a span of up to 50 inches of FR4 board material. For data rates of 6Gbps the device compensates up to 40in
of FR4 material. The equalization level is controlled by the setting of the signal control pin EQ.
Two de-emphasis levels can be selected on the transmit side to provide 0 or 1.2dB of additional high-frequency
loss compensation at the output.
The device is hot-plug capable⁽¹⁾ preventing device damage under device hot-insertion such as async signal
plug/removal, unpowered plug/removal, powered plug/removal, or surprise plug/removal.
(1) Requires use of AC coupling capacitors at differential inputs and outputs.
PART NUMBER
SN75LVCP600DRFR
SN75LVCP600DRFT
ORDERING INFORMATION⁽¹⁾
PART MARKING
600
600
PACKAGE
8-Pin DRF reel (large)
8-Pin DRF reel (small)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated