SN74LVCH245A-Q1 Datasheet, PDF (1/9 Pages) Texas Instruments – OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

www.ti.com
FEATURES
• Qualification in Accordance With AEC-Q100 ⁽¹⁾
• Qualified for Automotive Applications
• Customer-Specific Configuration Control Can
Be Supported Along With Major-Change
Approval
• ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
• Operates From 2 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 7 ns at 3.3 V
• Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
• Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
• Supports Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage With
3.3-V V_CC)
• I_off Supports Partial-Power-Down Mode
Operation
• Bus Hold on Data Inputs Eliminates the Need
for External Pullup/Pulldown Resistors
(1) Contact factory for details. Q100 qualification data available
on request.
SN74LVCH245A-Q1
OCTAL BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES493A – SEPTEMBER 2003 – REVISED DECEMBER 2005
DW OR PW PACKAGE
(TOP VIEW)
DIR 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND 10
20 V_CC
19 OE
18 B1
17 B2
16 B3
15 B4
14 B5
13 B6
12 B7
11 B8
DESCRIPTION/ORDERING INFORMATION
The SN74LVCH245A octal bus transceiver is designed for 2.7-V to 3.6-V V_CC operation.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in
a mixed 3.3-V/5-V system environment.
This device is designed for asynchronous communication between data buses. The device transmits data from
the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR)
input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. Use of pullup or
pulldown resistors with the bus-hold circuitry is not recommended. The bus-hold circuitry is part of the input
circuit and is not disabled by OE or DIR.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
T_A
–40°C to 125°C
SOIC – DW
TSSOP – PW
ORDERING INFORMATION
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER TOP-SIDE MARKING
Reel of 2000
SN74LVCH245AQDWRQ1
LH245AQ
Reel of 2000
SN74LVCH245AQPWRQ1
LH245AQ
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2005, Texas Instruments Incorporated