SN74LVCH16541A_06 Datasheet, PDF (1/13 Pages) Texas Instruments – 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS

www.ti.com
FEATURES
• Member of the Texas Instruments Widebus™
Family
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 4.2 ns at 3.3 V
• Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
• Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
• I_off Supports Partial-Power-Down Mode
Operation
• Supports Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage
With 3.3-V V_CC)
• Bus Hold on Data Inputs Eliminates the Need
for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per
JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 1000-V Charged-Device Model (C101)
SN74LVCH16541A
16-BIT BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCAS567H – MARCH 1996 – REVISED MARCH 2005
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
1OE1 1
1Y1 2
1Y2 3
GND 4
1Y3 5
1Y4 6
V_CC 7
1Y5 8
1Y6 9
GND 10
1Y7 11
1Y8 12
2Y1 13
2Y2 14
GND 15
2Y3 16
2Y4 17
V_CC 18
2Y5 19
2Y6 20
GND 21
2Y7 22
2Y8 23
2OE1 24
48 1OE2
47 1A1
46 1A2
45 GND
44 1A3
43 1A4
42 V_CC
41 1A5
40 1A6
39 GND
38 1A7
37 1A8
36 2A1
35 2A2
34 GND
33 2A3
32 2A4
31 V_CC
30 2A5
29 2A6
28 GND
27 2A7
26 2A8
25 2OE2
DESCRIPTION/ORDERING INFORMATION
This 16-bit buffer/driver is designed for 1.65-V to 3.6-V V_CC operation.
The SN74LVCH16541A is a noninverting 16-bit buffer composed of two 8-bit sections with separate
output-enable signals. For either 8-bit buffer section, the two output-enable (1OE1 and 1OE2 or 2OE1 and
2OE2) inputs must be low for the corresponding Y outputs to be active. If either output-enable input is high, the
outputs of that 8-bit buffer section are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
T_A
–40°C to 85°C
ORDERING INFORMATION
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER
SSOP – DL
Tube
Tape and reel
SN74LVCH16541ADL
SN74LVCH16541ADLR
TSSOP – DGG Tape and reel
SN74LVCH16541ADGGR
TVSOP – DGV Tape and reel
SN74LVCH16541ADGVR
TOP-SIDE MARKING
LVCH16541A
LVCH16541A
LDH541A
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1996–2005, Texas Instruments Incorporated