SN74LVCH16240A_08 Datasheet, PDF (1/12 Pages) Texas Instruments – 16-BIT BUFFER/DRIVER

www.ti.com
FEATURES
• Member of the Texas Instruments Widebus™
Family
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 4.2 ns at 3.3 V
• Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
• Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
• I_off Supports Partial-Power-Down Mode
Operation
• Bus Hold on Data Inputs Eliminates the Need
for External Pullup/Pulldown Resistors
• Supports Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
3.3-V V_CC)
• Latch-Up Performance Exceeds 250 mA Per
JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
SN74LVCH16240A
16-BIT BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCAS566H – MARCH 1996 – REVISED MARCH 2005
DGG OR DL PACKAGE
(TOP VIEW)
1OE 1
1Y1 2
1Y2 3
GND 4
1Y3 5
1Y4 6
V_CC 7
2Y1 8
2Y2 9
GND 10
2Y3 11
2Y4 12
3Y1 13
3Y2 14
GND 15
3Y3 16
3Y4 17
V_CC 18
4Y1 19
4Y2 20
GND 21
4Y3 22
4Y4 23
4OE 24
48 2OE
47 1A1
46 1A2
45 GND
44 1A3
43 1A4
42 V_CC
41 2A1
40 2A2
39 GND
38 2A3
37 2A4
36 3A1
35 3A2
34 GND
33 3A3
32 3A4
31 V_CC
30 4A1
29 4A2
28 GND
27 4A3
26 4A4
25 3OE
DESCRIPTION/ORDERING INFORMATION
This 16-bit buffer/driver is designed for 1.65-V to 3.6-V V_CC operation.
The SN74LVCH16240A is designed specifically to improve both the performance and density of 3-state memory
address drivers, clock drivers, and bus-oriented receivers and transmitters.
The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. This device provides inverting
outputs and symmetrical active-low output-enable (OE) inputs.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
T_A
–40°C to 85°C
ORDERING INFORMATION
PACKAGE ⁽¹⁾
ORDERABLE PART NUMBER
SSOP – DL
Tube
Tape and reel
SN74LVCH16240ADL
SN74LVCH16240ADLR
TSSOP – DGG
Tape and reel
SN74LVCH16240ADGGR
TOP-SIDE MARKING
LVCH16240A
LVCH16240A
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1996–2005, Texas Instruments Incorporated