SN74LVC1G126-EP Datasheet, PDF (1/12 Pages) Texas Instruments – SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

D Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification
D Qualification Pedigree^†
D Supports 5-V V_CC Operation
D Inputs Accept Voltages to 5.5 V
D Max t_pd of 3.7 ns at 3.3 V
† _{Component qualification in accordance with JEDEC and industry}
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
SN74LVC1G126ĆEP
SINGLE BUS BUFFER GATE
WITH 3ĆSTATE OUTPUT
SCES527A − DECEMBER 2003 − REVISED MAY 2004
D Low Power Consumption, 10-µA Max I_CC
D ±24-mA Output Drive at 3.3 V
D I_off Supports Partial-Power-Down Mode
Operation
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
− 1000-V Charged-Device Model (C101)
DCK PACKAGE
(TOP VIEW)
OE 1
A2
GND 3
5 V_CC
4Y
description/ordering information
This single bus buffer gate is designed for 1.65-V to 5.5-V V_CC operation.
The SN74LVC1G126 is a single line driver with a 3-state output. The output is disabled when the output-enable
(OE) input is low.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the
driver.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING§
−40°C to 85°C SOT (SC-70) − DCK Reel of 3000 CLVC1G126IDCKREP CN_
‡ _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design}
guidelines are available at www.ti.com/sc/package.
§ _{DCK: The actual top-side marking has one additional character that designates the assembly/test site.}
FUNCTION TABLE
INPUTS
OE
A
OUTPUT
Y
H
H
H
H
L
L
L
X
Z
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1