SN74LVC1G125-EP Datasheet, PDF (1/13 Pages) Texas Instruments – SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

www.ti.com
FEATURES
• Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
• Enhanced Diminishing Manufacturing
Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree ⁽¹⁾
• Supports 5-V V_CC Operation
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 3.7 ns at 3.3 V
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
SN74LVC1G125-EP
SINGLE BUS BUFFER GATE
WITH 3-STATE OUTPUT
SCES455B – DECEMBER 2003 – REVISED JUNE 2006
• Low Power Consumption, 10-µA Max I_CC
• ±24-mA Output Drive at 3.3 V
• I_off Supports Partial-Power-Down Mode
Operation
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DCK PACKAGE
(TOP VIEW)
OE 1
A2
GND 3
5 V_CC
4Y
DESCRIPTION/ORDERING INFORMATION
This bus buffer gate is designed for 1.65-V to 5.5-V V_CC operation.
The SN74LVC1G125 is a single line driver with a 3-state output. The output is disabled when the output-enable
(OE) input is high.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
T_A
–40°C to 85°C
–55°C to 125°C
PACKAGE ⁽¹⁾
SOT (SC-70) – DCK Reel of 3000
SOT (SC-70) – DCK Reel of 3000
ORDERABLE PART NUMBER
TOP-SIDE MARKING
CLVC1G125IDCKREP
CMO
CLVC1G125MDCKREP
CMO
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
FUNCTION TABLE
INPUTS
OE
A
L
H
L
L
H
X
OUTPUT
Y
H
L
Z
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2006, Texas Instruments Incorporated