SN74LV374 Datasheet, PDF (1/11 Pages) Texas Instruments – OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

SN54LV374, SN74LV374
OCTAL EDGEĆTRIGGERED DĆTYPE FLIPĆFLOPS
WITH 3ĆSTATE OUTPUTS
SCLS197B − FEBRUARY 1993 − REVISED APRIL 1996
D EPIC  (Enhanced-Performance Implanted
CMOS) 2-µ Process
D Typical V_OLP (Output Ground Bounce)
< 0.8 V at V_CC, T_A = 25°C
D Typical V_OHV (Output V_OH Undershoot)
> 2 V at V_CC, T_A = 25°C
D ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model
(C = 200 pF, R = 0)
D Latch-Up Performance Exceeds 250 mA
Per JEDEC Standard JESD-17
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW),
Ceramic Flat (W) Packages, Chip Carriers
(FK), and (J) 300-mil DIPs
SN54LV374 . . . J OR W PACKAGE
SN74LV374 . . . DB, DW, OR PW PACKAGE
(TOP VIEW)
OE 1
1Q 2
1D 3
2D 4
2Q 5
3Q 6
3D 7
4D 8
4Q 9
GND 10
20 V_CC
19 8Q
18 8D
17 7D
16 7Q
15 6Q
14 6D
13 5D
12 5Q
11 CLK
SN54LV374 . . . FK PACKAGE
(TOP VIEW)
description
These octal edge-triggered D-type flip-flops are
designed for 2.7-V to 5.5-V V_CC operation.
The ’LV374 feature 3-state outputs designed
specifically for driving highly capacitive or
relatively low-impedance loads. These devices
are particularly suitable for implementing buffer
registers, I/O ports, bidirectional bus drivers, and
working registers.
2D
3 2 1 20 19
4
18
8D
2Q 5
17 7D
3Q 6
16 7Q
3D 7
15 6Q
4D 8
14 6D
9 10 11 12 13
On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data
(D) inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either as normal logic state (high
or low logic levels) or high-impedance state. In the high-impedance state, the outputs neither load nor drive the
bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines
without need for interface or pullup components.
OE does not affect internal operations of the latch. Old data can be retained or new data can be entered while
the outputs are in the high-impedance state.
The SN74LV374 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count
and functionality of standard small-outline packages in less than half the printed-circuit-board area.
The SN54LV374 is characterized for operation over the full military temperature range of −55°C to 125°C. The
SN74LV374 is characterized for operation from −40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
Copyright  1996, Texas Instruments Incorporated
1