SN74LV1T08 Datasheet, PDF (1/16 Pages) Texas Instruments – Single Power Supply 2-Input Positive AND Gate CMOS Logic Level Shifter

www.ti.com
SN74LV1T08
SCLS739A – SEPTEMBER 2013 – REVISED SEPTEMBER 2013
Single Power Supply 2-Input Positive AND Gate CMOS Logic Level Shifter
Check for Samples: SN74LV1T08
FEATURES
1
• Single-Supply Voltage Translator at
5.0/3.3/2.5/1.8V
• Operating Range of 1.8V to 5.5V
• Up Translation Mode
– 1.2V⁽¹⁾ to 1.8V at 1.8V V_CC
– 1.5V⁽¹⁾ to 2.5V at 2.5V V_CC
– 1.8V⁽¹⁾ to 3.3V at 3.3V V_CC
– 3.3V to 5.0V at 5.0V V_CC
• Down Translation Mode
– 3.3V to 1.8V at 1.8V V_CC
– 3.3V to 2.5V at 2.5V V_CC
– 5.0V to 3.3V at 3.3V V_CC
• Logic Output is referring to supply V_CC
• Optimized the output driving
– 8mA Output Drive at 5V
– 7mA Output Drive at 3.3V
– 3mA Output Drive at 1.8V
• Unique Direction Translation-Up
• Characterized up to 50MHz at 3.3V V_CC
• 5V Tolerance on Input Pins
• –40°C to 125°C Operating Temperature Range
• Pb-Free Packages Available: SC-70 (DCK)
– 2 × 2.1 × 0.65 mm (Height 1.1mm)
• Latch-Up Performance Exceeds 250mA Per
JESD 17
• ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model (A114-B,
Class II)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
• Enable the standard gate function and drop-in
replacement
• Backward output compatible with AUP1G,
LVC1G
(1) _{Refer the VIH/VIL and output drive for lower VCC condition.}
DESCRIPTION
SN74LV1T08 is Low Voltage CMOS gate logic and
operates in wider voltage range for portable
equipment and battery back-up equipment. All output
logic level is a compatible CMOS Logic level with
referring to the supply V_CC which enable to output
3.3V and 5V CMOS Output.
The input is designed with lower threshold circuit to
match 1.8V Input Logic at V_CC = 3.3V and can be
used in 1.8V to 3.3V Level Up Translator functions. In
addition, the 5V Input tolerant on input pins enable
the chip to configure Down Translation as 3.3V to
2.5V Output at V_CC = 2.5V. The wide V_CC range of
1.8V to 5.5V allows the possibility of desired
switching output level to connect the controllers or
processors.
The SN74LV1T08 is designed with optimized current-
drive capability of 8 mA to reduce line reflections,
overshoot, and undershoot caused by high-drive
outputs.
DCK or DBV PACKAGE
(TOP VIEW)
A
1
5
V_CC
B
2
GND
3
4
Y
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated