SN74CBT16800C Datasheet, PDF (1/13 Pages) Texas Instruments – 20-BIT FET BUS SWITCH WITH PRECHARGED OUTPUTS 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT16800C
20ĆBIT FET BUS SWITCH WITH PRECHARGED OUTPUTS
5ĆV BUS SWITCH WITH ć2ĆV UNDERSHOOT PROTECTION
SCDS117C − JANUARY 2003 − REVISED OCTOBER 2003
D Member of the Texas Instruments
Widebus Family
D Undershoot Protection for Off-Isolation on
A and B Ports Up To −2 V
D B-Port Outputs Are Precharged by Bias
Voltage (BIASV) to Minimize Signal
Distortion During Live Insertion and
Hot-Plugging
D Supports PCI Hot Plug
D Bidirectional Data Flow, With Near-Zero
Propagation Delay
D Low ON-State Resistance (r_on)
Characteristics (r_on = 3 Ω Typical)
D Low Input/Output Capacitance Minimizes
Loading and Signal Distortion
(C_io(OFF) = 5.5 pF Typical)
D Data and Control Inputs Provide
Undershoot Clamp Diodes
D Low Power Consumption
(I_CC = 3 µA Max)
D V_CC Operating Range From 4 V to 5.5 V
D Data I/Os Support 0 to 5-V Signaling Levels
(0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
D Control Inputs Can Be Driven by TTL or
5-V/3.3-V CMOS Outputs
D I_off Supports Partial-Power-Down Mode
Operation
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Performance Tested Per JESD 22
− 2000-V Human-Body Model
(A114-B, Class II)
− 1000-V Charged-Device Model (C101)
D Supports Both Digital and Analog
Applications: PCI Interface, Memory
Interleaving, Bus Isolation, Low-Distortion
Signal Gating
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
BIASV 1
1A1 2
1A2 3
1A3 4
1A4 5
1A5 6
1A6 7
GND 8
1A7 9
1A8 10
1A9 11
1A10 12
2A1 13
2A2 14
V_CC 15
2A3 16
GND 17
2A4 18
2A5 19
2A6 20
2A7 21
2A8 22
2A9 23
2A10 24
48 1OE
47 2OE
46 1B1
45 1B2
44 1B3
43 1B4
42 1B5
41 GND
40 1B6
39 1B7
38 1B8
37 1B9
36 1B10
35 2B1
34 2B2
33 2B3
32 GND
31 2B4
30 2B5
29 2B6
28 2B7
27 2B8
26 2B9
25 2B10
description/ordering information
The SN74CBT16800C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r_on),
allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the
SN74CBT16800C provides protection for undershoot up to −2 V by sensing an undershoot event and ensuring
that the switch remains in the proper OFF state. The device also precharges the B port to a user-selectable bias
voltage (BIASV) to minimize live-insertion noise.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2003, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1