SN74ALVC16821 Datasheet, PDF (1/11 Pages) Texas Instruments – 3.3-V 20-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS

SN74ALVC16821
3.3ĆV 20ĆBIT BUSĆINTERFACE FLIPĆFLOP
WITH 3ĆSTATE OUTPUTS
SCAS269A − MARCH 1993 − REVISED AUGUST 1995
D Member of the Texas Instruments
Widebus  Family
D EPIC  (Enhanced-Performance Implanted
CMOS) Submicron Process
D Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
D ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model (C = 200 pF,
R = 0)
D Latch-Up Performance Exceeds 250 mA
Per JEDEC Standard JESD-17
D Package Options Include Plastic 300-mil
Shrink Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages
description
This 20-bit bus-interface flip-flop is designed for
low-voltage (3.3-V) V_CC operation; it is tested at
2.5-V, 2.7-V, and 3.3-V V_CC.
The SN74ALVC16821 can be used as two 10-bit
flip-flops or one 20-bit flip-flop. The 20 flip-flops
are edge-triggered D-type flip-flops. On the
positive transition of the clock (CLK) input, the
device provides true data at the Q outputs.
A buffered output-enable (OE) input can be used
to place the ten outputs in either a normal logic
state (high or low level) or a high-impedance state.
In the high-impedance state, the outputs neither
load nor drive the bus lines significantly. The
high-impedance state and increased drive
provide the capability to drive bus lines without
interface or pullup components.
DGG OR DL PACKAGE
(TOP VIEW)
1OE 1
1Q1 2
1Q2 3
GND 4
1Q3 5
1Q4 6
V_CC 7
1Q5 8
1Q6 9
1Q7 10
GND 11
1Q8 12
1Q9 13
1Q10 14
2Q1 15
2Q2 16
2Q3 17
GND 18
2Q4 19
2Q5 20
2Q6 21
V_CC 22
2Q7 23
2Q8 24
GND 25
2Q9 26
2Q10 27
2OE 28
56 1CLK
55 1D1
54 1D2
53 GND
52 1D3
51 1D4
50 V_CC
49 1D5
48 1D6
47 1D7
46 GND
45 1D8
44 1D9
43 1D10
42 2D1
41 2D2
40 2D3
39 GND
38 2D4
37 2D5
36 2D6
35 V_CC
34 2D7
33 2D8
32 GND
31 2D9
30 2D10
29 2CLK
The output-enable (OE) input does not affect the internal operation of the flip-flops. Old data can be retained
or new data can be entered while the outputs are in the high-impedance state.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVC16821 is available in TI’s shrink small-outline (DL) and thin shrink small-outline (DGG)
packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the
same printed-circuit-board area.
The SN74ALVC16821 is characterized for operation from − 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
1