SN74ALVC16260 Datasheet, PDF (1/9 Pages) Texas Instruments – 12-BIT TO 24-BIT MULTIPLEXED D-TYPE LATCH WITH 3-STATE OUTPUTS

SN74ALVC16260
12ĆBIT TO 24ĆBIT MULTIPLEXED DĆTYPE LATCH
WITH 3ĆSTATE OUTPUTS
SCAS252A − OCTOBER 1993 − REVISED JULY 1995
D EPIC  (Enhanced-Performance Implanted
CMOS) Submicron Process
D Member of the Texas Instruments
Widebus  Family
D ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model
(C = 200 pF, R = 0)
D Latch-Up Performance Exceeds 250 mA
Per JEDEC Standard JESD-17
D Flow-Through Architecture Optimizes
PCB Layout
D Bus Hold on Data Inputs Eliminates
the Need for External Pullup/Pulldown
Resistors
D Package Options Include Plastic Shrink
Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages
description
The SN74ALVC16260 is a 12-bit to 24-bit
multiplexed D-type latch used in applications
where two separate data paths must be
multiplexed onto, or demultiplexed from, a single
data path. Typical applications include
multiplexing and/or demultiplexing address and
data information in microprocessor or bus-
interface applications. This device is also useful in
memory-interleaving applications.
Three 12-bit I/O ports (A1−A12, 1B1−1B12, and
2B1−2B12) are available for address and/or data
transfer. The output-enable (OE1B, OE2B, and
OEA) inputs control the bus transceiver functions.
The OE1B and OE2B control signals also allow
bank control in the A-to-B direction.
DGG OR DL PACKAGE
(TOP VIEW)
OEA 1
LE1B 2
2B3 3
GND 4
2B2 5
2B1 6
V_CC 7
A1 8
A2 9
A3 10
GND 11
A4 12
A5 13
A6 14
A7 15
A8 16
A9 17
GND 18
A10 19
A11 20
A12 21
V_CC 22
1B1 23
1B2 24
GND 25
1B3 26
LE2B 27
SEL 28
56 OE2B
55 LEA2B
54 2B4
53 GND
52 2B5
51 2B6
50 V_CC
49 2B7
48 2B8
47 2B9
46 GND
45 2B10
44 2B11
43 2B12
42 1B12
41 1B11
40 1B10
39 GND
38 1B9
37 1B8
36 1B7
35 V_CC
34 1B6
33 1B5
32 GND
31 1B4
30 LEA1B
29 OE1B
Address and/or data information can be stored using the internal storage latches. The latch-enable (LE1B,
LE2B, LEA1B, and LEA2B) inputs are used to control data storage. When the latch-enable input is high, the
latch is transparent. When the latch-enable input goes low, the data present at the inputs is latched and remains
latched until the latch-enable input is returned high.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVC16260 is available in TI’s shrink small-outline (DL) and thin shrink small-outline (DGG)
packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the
same printed-circuit-board area.
The SN74ALVC16260 is characterized for operation from − 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
1