SN74ALVC162268 Datasheet, PDF (1/11 Pages) Texas Instruments – 12-BIT TO 24-BIT REGISTERED BUS EXCHANGER WITH 3-STATE OUTPUTS

SN74ALVC162268
12ĆBIT TO 24ĆBIT REGISTERED BUS EXCHANGER
WITH 3ĆSTATE OUTPUTS
SCES051 − AUGUST 1995
D B-Port Outputs Have Equivalent 26-Ω
Series Resistors, So No External Resistors
Are Required
D EPIC  (Enhanced-Performance Implanted
CMOS) Submicron Process
D Member of the Texas Instruments
Widebus  Family
D ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model
(C = 200 pF, R = 0)
D Latch-Up Performance Exceeds 250 mA
Per JEDEC Standard JESD-17
D Bus Hold on Data Inputs Eliminates
the Need for External Pullup/Pulldown
Resistors
D Package Options Include Plastic Shrink
Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages
description
The SN74ALVC162268 is a 12-bit to 24-bit
registered bus exchanger, which is intended for
use in applications where data must be
transferred from a narrow high-speed bus to a
wide, lower-frequency bus. This device is
designed specifically for low-voltage (3.3-V) V_CC
operation; it is tested at 2.5-V, 2.7-V, and 3.3-V
V_CC.
The device provides synchronous data exchange
between the two ports. Data is stored in the
internal registers on the low-to-high transition of
the clock (CLK) input when the appropriate
clock-enable (CLKEN) inputs are low. The select
(SEL) line is synchronous with CLK and selects
1B or 2B input data for the A outputs.
DGG OR DL PACKAGE
(TOP VIEW)
OEA 1
CLKEN1B 2
2B3 3
GND 4
2B2 5
2B1 6
V_CC 7
A1 8
A2 9
A3 10
GND 11
A4 12
A5 13
A6 14
A7 15
A8 16
A9 17
GND 18
A10 19
A11 20
A12 21
V_CC 22
1B1 23
1B2 24
GND 25
1B3 26
CLKEN2B 27
SEL 28
56 OEB
55 CLKENA2
54 2B4
53 GND
52 2B5
51 2B6
50 V_CC
49 2B7
48 2B8
47 2B9
46 GND
45 2B10
44 2B11
43 2B12
42 1B12
41 1B11
40 1B10
39 GND
38 1B9
37 1B8
36 1B7
35 V_CC
34 1B6
33 1B5
32 GND
31 1B4
30 CLKENA1
29 CLK
For data transfer in the A-to-B direction, a two-stage pipeline is provided in the A-to-1B path with a single storage
register in the A-to-2B path. Proper control of these inputs allows two sequential 12-bit words to be presented
synchronously as a 24-bit word on the B port. Data flow is controlled by the active-low output enables (OEA,
OEB). These control terminals are registered so bus direction changes are synchronous with CLK.
The B outputs, which are designed to sink up to 12 mA, include 26-Ω resistors to reduce overshoot and
undershoot.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVC162268 is characterized for operation from − 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
1