SN74AHC1G126-EP Datasheet, PDF (1/12 Pages) Texas Instruments – SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

SN74AHC1G126-EP
www.ti.com
SCLS731 – DECEMBER 2013
SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT
Check for Samples: SN74AHC1G126-EP
FEATURES
1
• Operating Range of 2 V to 5.5 V
• Max t_pd of 6 ns at 5 V
• Low Power Consumption, 10-μA Max I_CC
• ±8-mA Output Drive at 5 V
• Latch-Up Performance Exceeds 250 mA Per
JESD 17
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly and Test Site
• One Fabrication Site
• Available in Military (–55°C to 125°C)
Temperature Range
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
DCK PACKAGE
(TOP VIEW)
OE 1
A2
5
V_CC
GND 3
4Y
DESCRIPTION
The SN74AHC1G126 is a single bus buffer gate and line driver with 3-state output. The output is disabled when
the output-enable (OE) input is low. When OE is high, true data is passed from the A input to the Y output.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
T_J
–55°C to 125°C
ORDERING INFORMATION⁽¹⁾
PACKAGE ⁽²⁾
ORDERABLE PART NUMBER
SOT (SC-70) – DCK
Reel of 250
74AHC1G126MDCKTEP
TOP-SIDE MARKING
SLI
VID NUMBER
V62/14605-01XE
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
Table 1. FUNCTION TABLE
INPUTS
OE
A
H
H
H
L
L
X
OUTPUT
Y
H
L
Z
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated